PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D-50
D-50 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include color: CLEAR, material: ALUMINUM OVERALL, base_type: SINGLE SWIVEL, jaw_depth: 1.375 INCHES NOMINAL IN, jaw_width: 5.125 INCHES NOMINAL IN, unit_type: WEIGHING SCALE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-244-0580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D-50
NSN: 5330-00-244-0580
FSC: 5330
CAGE: 90160 — AMERICAN MFG CO (USA)
SPECIFICATIONS
colorCLEAR
materialALUMINUM OVERALL
base_typeSINGLE SWIVEL
jaw_depth1.375 INCHES NOMINAL IN
jaw_width5.125 INCHES NOMINAL IN
unit_typeWEIGHING SCALE
scale_range+0.0 TO 100.0 POUNDS LBS
gross_weight7.0 SHIPPING CONTAINER POUNDS
largest_width1.438 INCHES SINGLE END IN
overall_width1.438 INCHES IN
overall_length2.438 INCHES IN
wheel_quantity4
NSN5330-00-244-0580
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D-50 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: CONDITION DATA--LOOSE TWISTED ROPE FORM,DRY TAPE,NO TAR CONTENT
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONCONDITION DATA--LOOSE TWISTED ROPE FORM,DRY TAPE,NO TAR CONTENT
NONDEFINITIVE SPEC/STD DATA1 TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
3020PL1215164Interchangeable
interchangeable cross-reference
interchangeable
50-2Interchangeable
interchangeable cross-reference
interchangeable
D-50Interchangeable
interchangeable cross-reference
interchangeable
D50MInterchangeable
interchangeable cross-reference
interchangeable
PS-50/OH-1/TJ-6HInterchangeable
interchangeable cross-reference
interchangeable
MANGUERA ROJA 36 PULGADASInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D-50?
D-50 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace D-50?
There are 16 known substitutes for D-50: 3020PL1215164, 50-2, D-50 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D-50?
D-50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-244-0580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D-50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026