PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D-4727-01
D-4727-01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,WEBBING is a the manufacturer industrial component. Key specifications include width: 1.750 INCHES NOMINAL IN, length: 64.250 INCHES MINIMUM AND 64.750 INCHES MAXIMUM IN, end_type: BOTH FOLDED LOCATION NOT OTHERWISE SPECIFIED, fold_type: TIGHT LOCATION NOT OTHERWISE SPECIFIED, buckle_fastening_method: SEWED, buckle_style_designator: TIE DOWN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-067-8856, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D-4727-01
NSN: 5340-01-067-8856
FSC: 5340
CAGE: 05825 — O T S I (USA)
SPECIFICATIONS
width1.750 INCHES NOMINAL IN
length64.250 INCHES MINIMUM AND 64.750 INCHES MAXIMUM IN
end_typeBOTH FOLDED LOCATION NOT OTHERWISE SPECIFIED
fold_typeTIGHT LOCATION NOT OTHERWISE SPECIFIED
buckle_fastening_methodSEWED
buckle_style_designatorTIE DOWN
attachment_method_for_which_designedBUCKLE LOCATION NOT OTHERWISE SPECIFIED
NSN5340-01-067-8856
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D-4727-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END TYPE: BOTH FOLDED LOCATION NOT OTHERWISE SPECIFIED
•
FOLD TYPE: TIGHT LOCATION NOT OTHERWISE SPECIFIED
•
ATTACHMENT METHOD FOR WHICH DESIGNED: BUCKLE LOCATION NOT OTHERWISE SPECIFIED
•
BUCKLE STYLE DESIGNATOR: TIE DOWN
•
BUCKLE FASTENING METHOD: SEWED
•
LENGTH: 64.250 INCHES MINIMUM AND 64.750 INCHES MAXIMUM IN
•
WIDTH: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
END TYPEBOTH FOLDED LOCATION NOT OTHERWISE SPECIFIED
FOLD TYPETIGHT LOCATION NOT OTHERWISE SPECIFIED
ATTACHMENT METHOD FOR WHICH DESIGNEDBUCKLE LOCATION NOT OTHERWISE SPECIFIED
BUCKLE STYLE DESIGNATORTIE DOWN
BUCKLE FASTENING METHODSEWED
LENGTH64.250 INCHES MINIMUM AND 64.750 INCHES MAXIMUM IN
WIDTH1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
472701Interchangeable
interchangeable cross-reference
interchangeable
17B7N1001-501Interchangeable
interchangeable cross-reference
interchangeable
120-00001Interchangeable
interchangeable cross-reference
interchangeable
D-4727-02Interchangeable
interchangeable cross-reference
interchangeable
D-4727-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D-4727-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D-4727-01?
D-4727-01 is a STRAP,WEBBING.
What parts can replace D-4727-01?
There are 5 known substitutes for D-4727-01: 472701, 17B7N1001-501, 120-00001 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D-4727-01?
D-4727-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-067-8856. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D-4727-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026