PartsTable
Technical Data Sheet
Download PDF

D-44882 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

D-44882: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 1.4985 INCHES NOMINAL IN, material: STEEL OVERALL, overall_length: 8.000 INCHES NOMINAL IN, undercut_width: 0.103 INCHES MINIMUM IN, first_end_style: CHAMFERED, effective_length: 7.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-026-3220, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D-44882
NSN: 5315-00-026-3220
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
diameter1.4985 INCHES NOMINAL IN
materialSTEEL OVERALL
overall_length8.000 INCHES NOMINAL IN
undercut_width0.103 INCHES MINIMUM IN
first_end_styleCHAMFERED
effective_length7.250 INCHES NOMINAL IN
style_designatorGROOVE
features_providedCASEHARDENED
undercut_diameter1.412 INCHES NOMINAL IN
first_end_locationBOTH ENDS
first_end_taper_angle30.0 DEGREES NOMINAL
second_undercut_width0.103 INCHES MINIMUM IN
NSN5315-00-026-3220
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D-44882 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.103 INCHES MINIMUM IN
•
FIRST END TAPER LENGTH: 0.125 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 1.412 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MS382-1045 FSCM 10988 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 1.4985 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.103 INCHES MINIMUM IN
FIRST END TAPER LENGTH0.125 INCHES NOMINAL IN
UNDERCUT DIAMETER1.412 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
MATERIAL DOCUMENT AND CLASSIFICATIONMS382-1045 FSCM 10988 MFR REF SINGLE MATERIAL RESPONSE OVERALL
DIAMETER1.4985 INCHES NOMINAL IN
OVERALL LENGTH8.000 INCHES NOMINAL IN
FIRST END TAPER ANGLE30.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 1
D25342Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy D-44882?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D-44882?
D-44882 is a PIN,GROOVED,HEADLESS.
What parts can replace D-44882?
There is 1 known substitute for D-44882: D25342. Substitute compatibility should be verified for your specific system.
What is the NSN for D-44882?
D-44882 is cataloged in the U.S. Government catalog under NSN 5315-00-026-3220. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D-44882

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.