PartsTable
Technical Data Sheet
Download PDF

D-3315 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

D-3315: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL, nut_style: CLINCH, nut_height: 0.177 INCHES NOMINAL IN, nut_diameter: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, pilot_length: 0.050 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-131-1693, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D-3315
NSN: 5310-01-131-1693
FSC: 5310 — Nuts and Washers
CAGE: 86835 — RULAND MFG CO INC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
nut_styleCLINCH
nut_height0.177 INCHES NOMINAL IN
nut_diameter0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
pilot_length0.050 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.164 INCHES IN
thread_quantity_per_inch32
NSN5310-01-131-1693
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D-3315 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720,CLASS 302,COND A MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-763,CLASS 3O4,COND A FED SPEC SINGLE MATERIAL RESPONSE OR ASTM A582,TYPE 303,COND A ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A484,TYPE 303,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT DIAMETER: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720,CLASS 302,COND A MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-763,CLASS 3O4,COND A FED SPEC SINGLE MATERIAL RESPONSE OR ASTM A582,TYPE 303,COND A ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A484,TYPE 303,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
PILOT DIAMETER0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
PILOT LENGTH0.050 INCHES NOMINAL IN
NUT HEIGHT0.177 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
364-1001P3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D-3315?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D-3315?
D-3315 is a NUT,PLAIN,CLINCH.
What parts can replace D-3315?
There is 1 known substitute for D-3315: 364-1001P3. Substitute compatibility should be verified for your specific system.
What is the NSN for D-3315?
D-3315 is cataloged in the U.S. Government catalog under NSN 5310-01-131-1693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D-3315

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.