PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D-32115 REV A-8IN DUPLEX FLGE
D-32115 REV A-8IN DUPLEX FLGE ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: NICKEL ALLOY FILTERING MEDIUM, body_width: 25.250 INCHES NOMINAL IN, body_height: 43.125 INCHES NOMINAL IN, body_length: 42.250 INCHES NOMINAL IN, temp_rating: 28.0 FAHRENHEIT MINIMUM AND 95.0 FAHRENHEIT MAXIMUM DEGF, mounting_type: INLET CONNECTION AND OUTLET CONNECTION SIDE NEAR TOP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-122-1971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D-32115 REV A-8IN DUPLEX FLGE
NSN: 4730-01-122-1971
FSC: 4730
CAGE: 09032 — TATE ANDALE, LLC (USA)
SPECIFICATIONS
materialNICKEL ALLOY FILTERING MEDIUM
body_width25.250 INCHES NOMINAL IN
body_height43.125 INCHES NOMINAL IN
body_length42.250 INCHES NOMINAL IN
temp_rating28.0 FAHRENHEIT MINIMUM AND 95.0 FAHRENHEIT MAXIMUM DEGF
mounting_typeINLET CONNECTION AND OUTLET CONNECTION SIDE NEAR TOP
style_designatorTWIN STRAINER W/BOLTED COVER
operating_pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
perforation_diameter0.250 INCHES NOMINAL IN
perforation_quantity8.0 PER SQUARE INCH
filtering_media_designPERFORATED SINGLE FILTERING MEDIA RESPONSE
media_for_which_designedWATER
NSN4730-01-122-1971
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: D-32115 REV A-8IN DUPLEX FLGE · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST INTAKE FLANGE THICKNESS: 0.625 INCHES NOMINAL IN
•
FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION: IDENTICAL TO FIRST INTAKE CONNECTION
•
MATERIAL: NICKEL ALLOY FILTERING MEDIUM
•
FIRST INTAKE CONNECTION TYPE: PLAIN FACE FLANGE SIDE NEAR TOP
•
MEDIA FOR WHICH DESIGNED: WATER
•
DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET: 27.625 INCHES NOMINAL IN
•
FIRST INTAKE FLANGE SHAPE STYLE: ROUND W/UNTHREADED BOLT HOLES
•
FIRST INTAKE FLANGE FACE STYLE: PLAIN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST INTAKE FLANGE THICKNESS0.625 INCHES NOMINAL IN
FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTIONIDENTICAL TO FIRST INTAKE CONNECTION
MATERIALNICKEL ALLOY FILTERING MEDIUM
FIRST INTAKE CONNECTION TYPEPLAIN FACE FLANGE SIDE NEAR TOP
MEDIA FOR WHICH DESIGNEDWATER
DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET27.625 INCHES NOMINAL IN
FIRST INTAKE FLANGE SHAPE STYLEROUND W/UNTHREADED BOLT HOLES
FIRST INTAKE FLANGE FACE STYLEPLAIN
OPERATING PRESSURE150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
STYLE DESIGNATORTWIN STRAINER W/BOLTED COVER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
867KD49Interchangeable
interchangeable cross-reference
interchangeable
32115Interchangeable
interchangeable cross-reference
interchangeable
713137REVFInterchangeable
interchangeable cross-reference
interchangeable
713137Interchangeable
interchangeable cross-reference
interchangeable
32415Interchangeable
interchangeable cross-reference
interchangeable
321.15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D-32115 REV A-8IN DUPLEX FLGE?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D-32115 REV A-8IN DUPLEX FLGE?
D-32115 REV A-8IN DUPLEX FLGE is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace D-32115 REV A-8IN DUPLEX FLGE?
There are 7 known substitutes for D-32115 REV A-8IN DUPLEX FLGE: 867KD49, 32115, 713137REVF and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D-32115 REV A-8IN DUPLEX FLGE?
D-32115 REV A-8IN DUPLEX FLGE is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-122-1971. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D-32115 REV A-8IN DUPLEX FLGE

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026