PartsTable
Technical Data Sheet
Download PDF

D-1395 ITEM 3 — BEARING,ROLLER,SELF-ALIGNING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

D-1395 ITEM 3: BEARING,ROLLER,SELF-ALIGNING.

The BEARING,ROLLER,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL OR COPPER ALLOY OR ALUMINUM RETAINER, bore_shape: STRAIGHT, bore_diameter: 140.0 MILLIMETERS NOMINAL MM, overall_width: 53.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, special_features: OIL HOLES AND GROOVE IN OUTER RING. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-052-0061, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D-1395 ITEM 3
NSN: 3110-01-052-0061
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 56010 — HARNISCHFEGER CORP PORTAL CRANE PARTS DIV (USA)
SPECIFICATIONS
materialSTEEL OR COPPER ALLOY OR ALUMINUM RETAINER
bore_shapeSTRAIGHT
bore_diameter140.0 MILLIMETERS NOMINAL MM
overall_width53.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
special_featuresOIL HOLES AND GROOVE IN OUTER RING
style_designatorDOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
overall_outside_diameter210.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationRBEC NO.1
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
NSN3110-01-052-0061
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D-1395 ITEM 3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 7
2GA407Reference document
Same NSN cross-reference
Reference document — Secondary reference
25KP946Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
E75600528Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
V75600528Reference document
Same NSN cross-reference
Reference document — Secondary reference
31015-21Reference document
Same NSN cross-reference
Reference document — Secondary reference
23028CReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy D-1395 ITEM 3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D-1395 ITEM 3?
D-1395 ITEM 3 is a BEARING,ROLLER,SELF-ALIGNING.
What parts can replace D-1395 ITEM 3?
There are 7 known substitutes for D-1395 ITEM 3: 2GA407, 25KP946, E75600528 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D-1395 ITEM 3?
D-1395 ITEM 3 is cataloged in the U.S. Government catalog under NSN 3110-01-052-0061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D-1395 ITEM 3