PartsTable
Technical Data Sheet
D-10 ✓ Verified by PartsTable
Canon · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- A perfect 360° seal ensures that the camera is waterproof up to a depth of 10m.<br>- The lens barrier uses a high powered motor that operates even under a low temperature of -10°C.<br>- The double pane glass construction prevents condensation on the lens in low temperature.<br>- The exterior cover of 2.5mm thickness and reinforcing ribs on the inside of the camera cover provides shockproof performance from up to 1.22m.<br>- Large buttons enables even gloved hands easy access to key features.<br>-Smart Auto mode uses Canon’s latest Scene Detection Technology to determine subject brightness, contrast, distance and overall hue, including the ability to differentiate between day-time and low-light (night time) scenarios for an effortless capture of the perfect picture.<br>- The Smart Auto shooting mode intelligently selects the proper settings for the camera based on 18 pre-defined shooting situations.<br>-A 3-second warning appears immediately as you reviewed the shots after shooting wh This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-0101, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL D-10
NSN: 3110-00-117-0101
FSC: 3110
CAGE: 05469 — APPLIED INDUSTRIAL TECHNOLOGIES INC (USA)
SPECIFICATIONS
materialSTEEL STAINLESS - USE STB000 BALL BEARING
body_width4.000 INCHES NOMINAL IN
body_length22.000 INCHES NOMINAL IN
design_typeNONREUSABLE
temp_rating250.0 FAHRENHEIT MAXIMUM DEGF
power_rating100.00 WATTS NORMAL
usage_designINDOOR AND OUTDOOR
body_diameter2.562 INCHES NOMINAL IN
body_materialSTEEL
nominal_width1.68 INCHES ALL ENDS IN
overall_width6.500 INCHES NOMINAL IN
alignment_typeRIGID
NSN3110-00-117-0101
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D-10 · Canon ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
LARGEST BORE DIAMETER: 1.0625 INCHES NOMINAL IN
BORE SMALLEST DIAMETER: 1.0625 INCHES NOMINAL IN
SURFACE FINISH: GROUND
OVERALL OUTSIDE DIAMETER: 1.9687 INCHES NOMINAL IN
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.6250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
LARGEST BORE DIAMETER1.0625 INCHES NOMINAL IN
BORE SMALLEST DIAMETER1.0625 INCHES NOMINAL IN
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER1.9687 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STYLE DESIGNATORGROOVED RACE SURFACE, DOUBLE ROW, W/O SEATING RING
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
425147R92Interchangeable
interchangeable cross-reference
interchangeable
E10Interchangeable
interchangeable cross-reference
interchangeable
D10Interchangeable
interchangeable cross-reference
interchangeable
B9018137Interchangeable
interchangeable cross-reference
interchangeable
9018137Interchangeable
interchangeable cross-reference
interchangeable
PL305-10-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D-10?
D-10 is a FILTER,RADIO FREQUENCY INTERFERE manufactured by Canon. It is classified as a MRO (MRO_GENERAL).
What parts can replace D-10?
There are 19 known substitutes for D-10: 425147R92, E10, D10 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D-10?
D-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-0101. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D-10