PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CVC754-440D17
CVC754-440D17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, overall_width: 1.688 INCHES NOMINAL IN, overall_length: 4.312 INCHES NOMINAL IN, length_between_fasteners: 3.570 INCHES MINIMUM AND 3.580 INCHES MAXIMUM IN, material_document_and_classification: QQ-A-591 380 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-498-0765, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CVC754-440D17
NSN: 5340-00-498-0765
FSC: 5340
CAGE: 80378 — TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT INTEGRATED PROGRAMS DIVISION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
overall_width1.688 INCHES NOMINAL IN
overall_length4.312 INCHES NOMINAL IN
length_between_fasteners3.570 INCHES MINIMUM AND 3.580 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-591 380 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-498-0765
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CVC754-440D17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-591 380 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LENGTH BETWEEN FASTENERS: 3.570 INCHES MINIMUM AND 3.580 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-591 380 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH1.688 INCHES NOMINAL IN
LENGTH BETWEEN FASTENERS3.570 INCHES MINIMUM AND 3.580 INCHES MAXIMUM IN
OVERALL LENGTH4.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
G71Interchangeable
interchangeable cross-reference
interchangeable
351-7264-022Interchangeable
interchangeable cross-reference
interchangeable
SG71Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CVC754-440D17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CVC754-440D17?
CVC754-440D17 is a CLAMP,LOOP.
What parts can replace CVC754-440D17?
There are 3 known substitutes for CVC754-440D17: G71, 351-7264-022, SG71. Substitute compatibility should be verified for your specific system.
What is the NSN for CVC754-440D17?
CVC754-440D17 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-498-0765. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CVC754-440D17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026