PartsTable
Technical Data Sheet
Download PDF

CVC4231-3 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CVC4231-3: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.296 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN, cross-sectional_height: 0.061 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-585-7249, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CVC4231-3
NSN: 5331-00-585-7249
FSC: 5331 — O-ring
CAGE: 80378 — TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT INTEGRATED PROGRAMS DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.296 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
cross-sectional_height0.061 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN
NSN5331-00-585-7249
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CVC4231-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.296 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 2
80813-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
80110-3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy CVC4231-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CVC4231-3?
CVC4231-3 is a O-RING.
What parts can replace CVC4231-3?
There are 2 known substitutes for CVC4231-3: 80813-3, 80110-3. Substitute compatibility should be verified for your specific system.
What is the NSN for CVC4231-3?
CVC4231-3 is cataloged in the U.S. Government catalog under NSN 5331-00-585-7249. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CVC4231-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.