PartsTable
Technical Data Sheet
PartsTable / O-RING / CVC4225-015
CVC4225-015 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN, center_hole_diameter: 0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-046-0628, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CVC4225-015
NSN: 5331-01-046-0628
FSC: 5331 — O-RING
CAGE: 80378 — TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT INTEGRATED PROGRAMS DIVISION (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
center_hole_diameter0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-01-046-0628
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CVC4225-015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
•
CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
CENTER HOLE DIAMETER0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
95000-015Interchangeable
interchangeable cross-reference
interchangeable
84116 FIND NO.71Interchangeable
interchangeable cross-reference
interchangeable
477380003Interchangeable
interchangeable cross-reference
interchangeable
M83461/1-015Interchangeable
interchangeable cross-reference
interchangeable
GHN10089-9Interchangeable
interchangeable cross-reference
interchangeable
V1D10862-01CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CVC4225-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CVC4225-015?
CVC4225-015 is a O-RING.
What parts can replace CVC4225-015?
There are 31 known substitutes for CVC4225-015: 95000-015, 84116 FIND NO.71, 477380003 and 28 more. Substitute compatibility should be verified for your specific system.
Is CVC4225-015 still available?
CVC4225-015 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CVC4225-015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026