PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CV9S5901-025PC51
CV9S5901-025PC51 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: COPPER OVERALL, outside_diameter: 0.516 INCHES NOMINAL IN, cross-sectional_thickness: 0.109 INCHES NOMINAL IN, material_document_and_classification: 47-C-2,TY A,FSCM 80064 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-460-2667, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CV9S5901-025PC51
NSN: 5330-00-460-2667
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialCOPPER OVERALL
outside_diameter0.516 INCHES NOMINAL IN
cross-sectional_thickness0.109 INCHES NOMINAL IN
material_document_and_classification47-C-2,TY A,FSCM 80064 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-460-2667
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CV9S5901-025PC51 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.109 INCHES NOMINAL IN
•
MATERIAL: COPPER OVERALL
•
OUTSIDE DIAMETER: 0.516 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 47-C-2,TY A,FSCM 80064 MFR REF SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.109 INCHES NOMINAL IN
MATERIALCOPPER OVERALL
OUTSIDE DIAMETER0.516 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION47-C-2,TY A,FSCM 80064 MFR REF SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
B26Interchangeable
interchangeable cross-reference
interchangeable
B26-25K1-2WInterchangeable
interchangeable cross-reference
interchangeable
01018600Interchangeable
interchangeable cross-reference
interchangeable
TA-26Interchangeable
interchangeable cross-reference
interchangeable
SC5950-0030-1Interchangeable
interchangeable cross-reference
interchangeable
12SP84Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CV9S5901-025PC51?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CV9S5901-025PC51?
CV9S5901-025PC51 is a GASKET.
What parts can replace CV9S5901-025PC51?
There are 16 known substitutes for CV9S5901-025PC51: B26, B26-25K1-2W, 01018600 and 13 more. Substitute compatibility should be verified for your specific system.
Is CV9S5901-025PC51 still available?
CV9S5901-025PC51 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CV9S5901-025PC51

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026