PartsTable
Technical Data Sheet
Download PDF

CV178113 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

CV178113: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.341 INCHES MINIMUM IN, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND, width_across_flats: 0.669 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-501-0948, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CV178113
NSN: 5310-01-501-0948
FSC: 5310 — Nuts and Washers
CAGE: KCQ24 — TVS SUPPLY CHAIN SOLUTIONS LIMITED (GBR)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.341 INCHES MINIMUM IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.669 INCHES MINIMUM IN
nominal_thread_size0.375 INCHES IN
end_item_identificationCONTRACTOR LOGISTICS LIFETIME SUPPORT (CRLS), HYDRAULIC EXCAVATOR TYPE 2 (HYEX)(MODEL 230 LCRD HX2) NSN 3805-01-463-0806, TM5-3805-280-24-P
thread_quantity_per_inch16
part_name_assigned_by_controlling_agencyNUT, HEX 3/8-16
NSN5310-01-501-0948
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CV178113 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.669 INCHES MINIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT HEIGHT: 0.341 INCHES MINIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.669 INCHES MINIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT HEIGHT0.341 INCHES MINIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNUT, HEX 3/8-16
NUT STYLEHEXAGON
END ITEM IDENTIFICATIONCONTRACTOR LOGISTICS LIFETIME SUPPORT (CRLS), HYDRAULIC EXCAVATOR TYPE 2 (HYEX)(MODEL 230 LCRD HX2) NSN 3805-01-463-0806, TM5-3805-280-24-P
THREAD QUANTITY PER INCH16
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
95922894Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CV178113?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CV178113?
CV178113 is a NUT,PLAIN,HEXAGON.
What parts can replace CV178113?
There is 1 known substitute for CV178113: 95922894. Substitute compatibility should be verified for your specific system.
What is the NSN for CV178113?
CV178113 is cataloged in the U.S. Government catalog under NSN 5310-01-501-0948. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CV178113

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.