CU09625-025 — SYNCHRO ASSEMBLY

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

CU09625-025: SYNCHRO ASSEMBLY.

The SYNCHRO ASSEMBLY is a the manufacturer industrial component. Key specifications include fragility_factor: MODERATELY RUGGED, end_item_identification: 500 AND 651. This part is cataloged in the U.S.

Government catalog under NSN 5990-00-113-6137, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

CU09625-025

NSN: 5990-00-113-6137
FSC: 5990 — Synchros and Resolvers
CAGE: 88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)

SPECIFICATIONS

fragility_factor	MODERATELY RUGGED
end_item_identification	500 AND 651
NSN	5990-00-113-6137

COMPONENT DIAGRAM

KEY FEATURES

•

FRAGILITY FACTOR: MODERATELY RUGGED

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: ELECTRICAL DATA ALL SECTIONS;STATOR INPUT VOLTAGE 11.8 V; INPUT CURRENT 23 MA MAX; INPUT POWER 44 MW; FREQ 400 HZ; ZSO 444 OHMS MIN TO 570 OHMS MAX PLUS 76 DEG MIN TO 81 DEG MAX; ZRS 830 OHMS MIN TO 940 OHMS MAX PLUS 16 DEG MIN TO 20 DEG MAX; TRANSFORMATION RATIO 2.203; PHASE SHIFT 8 DEG; TEMP RISE 10 DEG MAX; NULL VOLTAGE FUNDAMENTAL 25 MV; TOTAL 30 MV; ELECTRICAL ERROR 7 MIN; FRICTION TORQUE AT 25 DEG C 0.11 OZ INS; ZERO ALIGNMENT WITHIN 3 MIN; BODY DIM; PILOT DIA 0.5 IN. MAX; PILOT LG 0.04 IN.; FLANGE DIA 0.75 IN. MAX; FLANGE THK 0.062 IN.; UNDERCUT DIA 0.692 IN.; UNDERCUT W 0.062 IN.; BODY DIA 0.95 IN. MAX; MOUNTING SURFACE TO TERM END LG 2.955 IN. MAX; O/A LG 3.37 IN. MAX; SHAFT TYPE RD SLOTTED; SHAFT DIM.; 0.09 IN. MAX DIA; 0.325 IN. LG; SHAFT RADIAL PLAY 0.0004 IN. AND 0.25 LB LOAD; SHAFT END PLAY 0.0007 IN. AND 0.5 LB LOAD; SHAFT RUNOUT 0.0010 IN.; TERMINALS 6 WIRE LEADS; TERM LOCATION REAR AND SIDE V

TECHNICAL CHARACTERISTICS

FRAGILITY FACTOR	MODERATELY RUGGED
GENERAL CHARACTERISTICS ITEM DESCRIPTION	ELECTRICAL DATA ALL SECTIONS;STATOR INPUT VOLTAGE 11.8 V; INPUT CURRENT 23 MA MAX; INPUT POWER 44 MW; FREQ 400 HZ; ZSO 444 OHMS MIN TO 570 OHMS MAX PLUS 76 DEG MIN TO 81 DEG MAX; ZRS 830 OHMS MIN TO 940 OHMS MAX PLUS 16 DEG MIN TO 20 DEG MAX; TRANSFORMATION RATIO 2.203; PHASE SHIFT 8 DEG; TEMP RISE 10 DEG MAX; NULL VOLTAGE FUNDAMENTAL 25 MV; TOTAL 30 MV; ELECTRICAL ERROR 7 MIN; FRICTION TORQUE AT 25 DEG C 0.11 OZ INS; ZERO ALIGNMENT WITHIN 3 MIN; BODY DIM; PILOT DIA 0.5 IN. MAX; PILOT LG 0.04 IN.; FLANGE DIA 0.75 IN. MAX; FLANGE THK 0.062 IN.; UNDERCUT DIA 0.692 IN.; UNDERCUT W 0.062 IN.; BODY DIA 0.95 IN. MAX; MOUNTING SURFACE TO TERM END LG 2.955 IN. MAX; O/A LG 3.37 IN. MAX; SHAFT TYPE RD SLOTTED; SHAFT DIM.; 0.09 IN. MAX DIA; 0.325 IN. LG; SHAFT RADIAL PLAY 0.0004 IN. AND 0.25 LB LOAD; SHAFT END PLAY 0.0007 IN. AND 0.5 LB LOAD; SHAFT RUNOUT 0.0010 IN.; TERMINALS 6 WIRE LEADS; TERM LOCATION REAR AND SIDE V
END ITEM IDENTIFICATION	500 AND 651

SUBSTITUTES & CROSS-REFERENCES 1

Z-TTH-8T-DQ-08/08/L545Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation + specific procedure

Ready to buy CU09625-025?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CU09625-025?

CU09625-025 is a SYNCHRO ASSEMBLY.

What parts can replace CU09625-025?

There is 1 known substitute for CU09625-025: Z-TTH-8T-DQ-08/08/L545. Substitute compatibility should be verified for your specific system.

What is the NSN for CU09625-025?

CU09625-025 is cataloged in the U.S. Government catalog under NSN 5990-00-113-6137. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CU09625-025 — SYNCHRO ASSEMBLY

Request a Quote — CU09625-025