PartsTable
Technical Data Sheet
Download PDF

CTS210A-6 — NUT,PLAIN,EXTENDED WASHER,HEXAGO

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

CTS210A-6: NUT,PLAIN,EXTENDED WASHER,HEXAGO.

NUT,PLAIN,EXTENDED WASHER,HEXAGO. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC), overall_height: 1.000 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-376-2935, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CTS210A-6
NSN: 5310-01-376-2935
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_height1.000 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
width_across_flats1.063 INCHES NOMINAL IN
nominal_thread_size0.750 INCHES IN
washer_outside_diameter1.125 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
thread_quantity_per_inch10
surface_treatment_document_and_classificationMIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-376-2935
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CTS210A-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 1.125 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 1.063 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
SURFACE TREATMENT: OXIDE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.000 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER1.125 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
WIDTH ACROSS FLATS1.063 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
SURFACE TREATMENTOXIDE OVERALL
NUT STYLEHEXAGON
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CTS210A-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CTS210A-6?
CTS210A-6 is a NUT,PLAIN,EXTENDED WASHER,HEXAGO.
What is the NSN for CTS210A-6?
CTS210A-6 is cataloged in the U.S. Government catalog under NSN 5310-01-376-2935. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CTS210A-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.