PartsTable
Technical Data Sheet
PartsTable / MRO / CSR13B476MR
CSR13B476MR ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The CAPACITOR,FIXED,ELECTROLYTIC is a the manufacturer cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.474 INCHES NOMINAL IN, body_diameter: 0.185 INCHES NOMINAL IN, terminal_length: 1.500 INCHES NOMINAL IN, features_provided: HERMETICALLY SEALED CASE, terminal_diameter: 0.020 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-106-6971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CSR13B476MR
NSN: 5910-01-106-6971
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length0.474 INCHES NOMINAL IN
body_diameter0.185 INCHES NOMINAL IN
terminal_length1.500 INCHES NOMINAL IN
features_providedHERMETICALLY SEALED CASE
terminal_diameter0.020 INCHES NOMINAL IN
reliability_indicatorESTABLISHED
electrical_polarizationPOLARIZED
case_insulation_materialPLASTIC
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
tolerance_range_per_section-20.00 TO 20.00 PERCENT SINGLE SECTION
NSN5910-01-106-6971
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,ELECTROLYTIC TITLE COMPONENT PN CSR13B476MR MFR CAPACITOR,FIXED,ELECTR
KEY FEATURES
•
SCHEMATIC DIAGRAM DESIGNATOR: ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
•
CAPACITANCE VALUE PER SECTION: 47.000 MICROFARADS SINGLE SECTION
•
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION: 6.0 DC SINGLE SECTION
•
RELIABILITY FAILURE RATE LEVEL IN PERCENT: 0.0100
•
BODY LENGTH: 0.474 INCHES NOMINAL IN
•
TERMINAL TYPE AND QUANTITY: 2 UNINSULATED WIRE LEAD
•
TEST DATA DOCUMENT: 81349-MIL-C-39003/1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
CASE INSULATION MATERIAL: PLASTIC
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SCHEMATIC DIAGRAM DESIGNATORELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
CAPACITANCE VALUE PER SECTION47.000 MICROFARADS SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION6.0 DC SINGLE SECTION
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.0100
BODY LENGTH0.474 INCHES NOMINAL IN
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
TEST DATA DOCUMENT81349-MIL-C-39003/1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CASE INSULATION MATERIALPLASTIC
DC LEAKAGE AT REFERENCE TEMP1.500 MICROAMPERES
CAPACITIVE ELECTRODE MATERIALTANTALUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
SCM476BP006B4Interchangeable
interchangeable cross-reference
interchangeable
M39003/01-2964Interchangeable
interchangeable cross-reference
interchangeable
150D476X0006B3Interchangeable
interchangeable cross-reference
interchangeable
441-0377-709Interchangeable
interchangeable cross-reference
interchangeable
4329728722Interchangeable
interchangeable cross-reference
interchangeable
M39002-01-0022Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CSR13B476MR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CSR13B476MR?
CSR13B476MR is a CAPACITOR,FIXED,ELECTROLYTIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace CSR13B476MR?
There are 8 known substitutes for CSR13B476MR: SCM476BP006B4, M39003/01-2964, 150D476X0006B3 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CSR13B476MR?
CSR13B476MR is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-106-6971. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CSR13B476MR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026