PartsTable
Technical Data Sheet
Download PDF

CSN46337 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CSN46337: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: LEATHER ARTIFICIAL OVERALL, overall_width: 1.597 INCHES MINIMUM AND 1.603 INCHES MAXIMUM IN, overall_length: 1.802 INCHES MINIMUM AND 1.808 INCHES MAXIMUM IN, aperture_diameter: 0.588 INCHES MINIMUM AND 0.592 INCHES MAXIMUM IN, material_document_and_classification: 21 FSCM 61463 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-070-8872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CSN46337
NSN: 5330-00-070-8872
FSC: 5330 — Packing and Gasket Materials
CAGE: 82254 — CURTIS DYNA-FOG, LTD. (USA)
SPECIFICATIONS
materialLEATHER ARTIFICIAL OVERALL
overall_width1.597 INCHES MINIMUM AND 1.603 INCHES MAXIMUM IN
overall_length1.802 INCHES MINIMUM AND 1.808 INCHES MAXIMUM IN
aperture_diameter0.588 INCHES MINIMUM AND 0.592 INCHES MAXIMUM IN
material_document_and_classification21 FSCM 61463 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-070-8872
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CSN46337 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: 21 FSCM 61463 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE DIAMETER: 0.588 INCHES MINIMUM AND 0.592 INCHES MAXIMUM IN
•
MATERIAL: LEATHER ARTIFICIAL OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATION21 FSCM 61463 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.802 INCHES MINIMUM AND 1.808 INCHES MAXIMUM IN
OVERALL WIDTH1.597 INCHES MINIMUM AND 1.603 INCHES MAXIMUM IN
APERTURE DIAMETER0.588 INCHES MINIMUM AND 0.592 INCHES MAXIMUM IN
MATERIALLEATHER ARTIFICIAL OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
610590Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy CSN46337?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CSN46337?
CSN46337 is a GASKET.
What parts can replace CSN46337?
There is 1 known substitute for CSN46337: 610590. Substitute compatibility should be verified for your specific system.
What is the NSN for CSN46337?
CSN46337 is cataloged in the U.S. Government catalog under NSN 5330-00-070-8872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CSN46337