PartsTable
Technical Data Sheet
Download PDF

CSIL-1500740093M — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

CSIL-1500740093M: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, thickness: 0.09 INCHES NOMINAL IN, hole_diameter: 0.74 INCHES NOMINAL IN, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL, overall_diameter: 1.50 INCHES NOMINAL IN, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-735-1468, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CSIL-1500740093M
NSN: 5310-01-735-1468
FSC: 5310 — Nuts and Washers
CAGE: 5ENG9 — CANNON GASKET INC. (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
thickness0.09 INCHES NOMINAL IN
hole_diameter0.74 INCHES NOMINAL IN
hardness_rating60.0 SHORE DUROMETER A NOMINAL
overall_diameter1.50 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification4940-01-601-1928
cross-sectional_shape_styleRECTANGULAR
part_name_assigned_by_controlling_agencyRUBBER WASHER,.75 I.D.
NSN5310-01-735-1468
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CSIL-1500740093M · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.50 INCHES NOMINAL IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.50 INCHES NOMINAL IN
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYRUBBER WASHER,.75 I.D.
END ITEM IDENTIFICATION4940-01-601-1928
MATERIALRUBBER SILICONE CLASS Q OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.74 INCHES NOMINAL IN
THICKNESS0.09 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
11B5091325Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CSIL-1500740093M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CSIL-1500740093M?
CSIL-1500740093M is a WASHER,FLAT.
What parts can replace CSIL-1500740093M?
There is 1 known substitute for CSIL-1500740093M: 11B5091325. Substitute compatibility should be verified for your specific system.
What is the NSN for CSIL-1500740093M?
CSIL-1500740093M is cataloged in the U.S. Government catalog under NSN 5310-01-735-1468. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CSIL-1500740093M

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.