PartsTable
Technical Data Sheet
Download PDF

CS9495-000 — RUBBER STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CS9495-000: RUBBER STRIP.

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include length: 8.1 INCHES MINIMUM AND 9.9 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q, temp_rating: 180.0 CELSIUS DEGC, special_features: MIN TEMP RATING IS -75.0 C, surface_condition: GLOSS BOTH SIDES, cross-sectional_width: 0.06 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-611-6682, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CS9495-000
NSN: 5330-01-611-6682
FSC: 5330 — Packing and Gasket Materials
CAGE: 06090 — TE CONNECTIVITY CORPORATION DBA RAYCHEM PRODUCT DIVISION (USA)
SPECIFICATIONS
length8.1 INCHES MINIMUM AND 9.9 INCHES MAXIMUM IN
materialRUBBER SILICONE CLASS Q
temp_rating180.0 CELSIUS DEGC
special_featuresMIN TEMP RATING IS -75.0 C
surface_conditionGLOSS BOTH SIDES
cross-sectional_width0.06 INCHES NOMINAL IN
cross-sectional_height0.54 INCHES MINIMUM AND 0.66 INCHES MAXIMUM IN
minimum_tensile_strengthERR-060
cross-sectional_shape_styleRECTANGULAR
nonmetallic_hardness_rating60.0 NOMINAL SHORE DUROMETER A
part_name_assigned_by_controlling_agencyBUSHING,SIDE ENTRY
NSN5330-01-611-6682
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CS9495-000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 180.0 CELSIUS DEGC
•
LENGTH: 8.1 INCHES MINIMUM AND 9.9 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.54 INCHES MINIMUM AND 0.66 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: ERR-060
•
CROSS-SECTIONAL WIDTH: 0.06 INCHES NOMINAL IN
•
SURFACE CONDITION: GLOSS BOTH SIDES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS
TEMP RATING180.0 CELSIUS DEGC
LENGTH8.1 INCHES MINIMUM AND 9.9 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.54 INCHES MINIMUM AND 0.66 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTHERR-060
CROSS-SECTIONAL WIDTH0.06 INCHES NOMINAL IN
SURFACE CONDITIONGLOSS BOTH SIDES
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SPECIAL FEATURESMIN TEMP RATING IS -75.0 C
PART NAME ASSIGNED BY CONTROLLING AGENCYBUSHING,SIDE ENTRY
MATERIALRUBBER SILICONE CLASS Q
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy CS9495-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CS9495-000?
CS9495-000 is a RUBBER STRIP.
What is the NSN for CS9495-000?
CS9495-000 is cataloged in the U.S. Government catalog under NSN 5330-01-611-6682. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CS9495-000