PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CS3464X1
CS3464X1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.7869 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN, overall_width: 0.5507 INCHES MINIMUM AND 0.5512 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-342-1264, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CS3464X1
NSN: 3110-00-342-1264
FSC: 3110
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.7869 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN
overall_width0.5507 INCHES MINIMUM AND 0.5512 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresTWO LOCKING SLOTS GROUND ON OUTER RING 180 DEGAPART
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-342-1264
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CS3464X1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL: GREASE
•
SHIELD QUANTITY: 2
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
LUBRICATION MATERIALGREASE
SHIELD QUANTITY2
SPECIAL FEATURESTWO LOCKING SLOTS GROUND ON OUTER RING 180 DEGAPART
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
BORE SHAPESTRAIGHT
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL FIT-UP DESIGNATIONSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
6204ZZInterchangeable
interchangeable cross-reference
interchangeable
T10776Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
ASTM B221Interchangeable
interchangeable cross-reference
interchangeable
M9300-7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CS3464X1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CS3464X1?
CS3464X1 is a BEARING,BALL,ANNULAR.
What parts can replace CS3464X1?
There are 5 known substitutes for CS3464X1: 6204ZZ, T10776, AMS-QQ-A-200/11 and 2 more. Substitute compatibility should be verified for your specific system.
Is CS3464X1 still available?
CS3464X1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CS3464X1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026