PartsTable
Technical Data Sheet
Download PDF

CS3412X6-90 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

CS3412X6-90: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 BALL, bore_shape: STRAIGHT, bore_diameter: 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, overall_width: 0.4321 INCHES MINIMUM AND 0.4331 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-133-6734, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CS3412X6-90
NSN: 3110-00-133-6734
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 BALL
bore_shapeSTRAIGHT
bore_diameter0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
overall_width0.4321 INCHES MINIMUM AND 0.4331 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresSEAL RINGS BLACK OXIDE FINISH,1/4 TO 1/3 FULL OF SPECIFIED GREASE,BEARING DRAG NOT TO EXCEED 6 IN. OZ RACE ROTATE 1725 RPM IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
features_providedMOUNTING GROOVE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
NSN3110-00-133-6734
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CS3412X6-90 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 4068 ASSN STD SINGLE MATERIAL RESPONSE INNER RING
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 4068 ASSN STD SINGLE MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 4068 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
OVERALL WIDTH0.4321 INCHES MINIMUM AND 0.4331 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.3774 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
FEATURES PROVIDEDMOUNTING GROOVE
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
CS3412X6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CS3412X6-90?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CS3412X6-90?
CS3412X6-90 is a BEARING,BALL,ANNULAR.
What parts can replace CS3412X6-90?
There is 1 known substitute for CS3412X6-90: CS3412X6. Substitute compatibility should be verified for your specific system.
What is the NSN for CS3412X6-90?
CS3412X6-90 is cataloged in the U.S. Government catalog under NSN 3110-00-133-6734. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CS3412X6-90