PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CS2510-0006
CS2510-0006 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BAND,RETAINING is a the manufacturer industrial component. Key specifications include width: 2.000 INCHES NOMINAL IN, length: 2.625 INCHES NOMINAL IN, material: STEEL, thickness: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, hole_diameter: 0.281 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-353-0755, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CS2510-0006
NSN: 5340-00-353-0755
FSC: 5340
CAGE: 16236 — DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) (USA)
SPECIFICATIONS
width2.000 INCHES NOMINAL IN
length2.625 INCHES NOMINAL IN
materialSTEEL
thickness0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
hole_diameter0.281 INCHES NOMINAL IN
hole_quantity2
NSN5340-00-353-0755
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CS2510-0006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL
•
THICKNESS: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
HOLE QUANTITY: 2
•
LENGTH: 2.625 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
WIDTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL
THICKNESS0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
HOLE QUANTITY2
LENGTH2.625 INCHES NOMINAL IN
HOLE DIAMETER0.281 INCHES NOMINAL IN
WIDTH2.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
1048154Interchangeable
interchangeable cross-reference
interchangeable
T202-1Interchangeable
interchangeable cross-reference
interchangeable
MODEL1131-1Interchangeable
interchangeable cross-reference
interchangeable
R4267FInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CS2510-0006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CS2510-0006?
CS2510-0006 is a BAND,RETAINING.
What parts can replace CS2510-0006?
There are 4 known substitutes for CS2510-0006: 1048154, T202-1, MODEL1131-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CS2510-0006?
CS2510-0006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-353-0755. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CS2510-0006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026