PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CS1024641
CS1024641 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OR STEEL COMP 416SE OVERALL, corner_shape: SQUARE INSIDE LEFT CORNER, flange_width: 0.1250 INCHES NOMINAL IN, overall_length: 0.6250 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES INTERMEDIATE LAYER, hardness_rating: 58.0 ROCKWELL C MINIMUM INSIDE DIAMETER SURFACE OF BODY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-102-4641, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CS1024641
NSN: 3120-00-102-4641
FSC: 3120
CAGE: 07310 — CALABRESE & SONS, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OR STEEL COMP 416SE OVERALL
corner_shapeSQUARE INSIDE LEFT CORNER
flange_width0.1250 INCHES NOMINAL IN
overall_length0.6250 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES INTERMEDIATE LAYER
hardness_rating58.0 ROCKWELL C MINIMUM INSIDE DIAMETER SURFACE OF BODY
special_featuresBODY DIA 0.3750 IN. ALONG FINAL 0.1250 IN. IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.2500 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM IN
body_outside_diameter0.4375 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
flange_outside_diameter0.5940 INCHES NOMINAL IN
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN3120-00-102-4641
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: CS1024641 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
BODY OUTSIDE DIAMETER: 0.4375 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
•
FLANGE WIDTH: 0.1250 INCHES NOMINAL IN
•
FLANGE OUTSIDE DIAMETER: 0.5940 INCHES NOMINAL IN
•
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM IN
•
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER
•
MATERIAL: STEEL COMP 416 OR STEEL COMP 416SE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.6250 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER0.4375 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
FLANGE WIDTH0.1250 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER0.5940 INCHES NOMINAL IN
BODY INSIDE DIAMETER0.2500 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM IN
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
MATERIALSTEEL COMP 416 OR STEEL COMP 416SE OVERALL
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
91214Interchangeable
interchangeable cross-reference
interchangeable
0097885Interchangeable
interchangeable cross-reference
interchangeable
8.35.507.07Interchangeable
interchangeable cross-reference
interchangeable
XR26346NInterchangeable
interchangeable cross-reference
interchangeable
BH-209Interchangeable
interchangeable cross-reference
interchangeable
11A7228Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CS1024641?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CS1024641?
CS1024641 is a RESISTOR,FIXED,WIRE WOUND.
What parts can replace CS1024641?
There are 8 known substitutes for CS1024641: 91214, 0097885, 8.35.507.07 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CS1024641?
CS1024641 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-102-4641. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CS1024641

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026