PartsTable
Technical Data Sheet
Download PDF

CS0S032-6 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

CS0S032-6: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.453 INCHES MAXIMUM IN, pilot_length: 0.075 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-213-8796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CS0S032-6
NSN: 5310-00-213-8796
FSC: 5310 — Nuts and Washers
CAGE: 46384 — PENN ENGINEERING & MANUFACTURING CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.453 INCHES MAXIMUM IN
pilot_length0.075 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
pilot_diameter0.343 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.375 INCHES NOMINAL IN
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
NSN5310-00-213-8796
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CS0S032-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
PILOT DIAMETER: 0.343 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.075 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.453 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
PILOT DIAMETER0.343 INCHES MAXIMUM IN
PILOT LENGTH0.075 INCHES MAXIMUM IN
NUT HEIGHT0.453 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
7117504-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
623NBHS12Reference document
Same NSN cross-reference
Reference document — Secondary reference
GS500M3S6Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CS0S032-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CS0S032-6?
CS0S032-6 is a NUT,PLAIN,CLINCH.
What parts can replace CS0S032-6?
There are 3 known substitutes for CS0S032-6: 7117504-7, 623NBHS12, GS500M3S6. Substitute compatibility should be verified for your specific system.
What is the NSN for CS0S032-6?
CS0S032-6 is cataloged in the U.S. Government catalog under NSN 5310-00-213-8796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CS0S032-6