The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 3.750 INCHES NOMINAL IN, first_leg_length: 0.840 INCHES NOMINAL IN, second_leg_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-491-0341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
CS-1300-0001
NSN:5340-00-491-0341 FSC:5340 — Hardware, Commercial CAGE:16236 — DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) (USA)
SPECIFICATIONS
material
STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
3.750 INCHES NOMINAL IN
first_leg_length
0.840 INCHES NOMINAL IN
second_leg_angle
90.0 DEGREES NOMINAL
second_leg_style
SQUARE
second_leg_width
0.375 INCHES NOMINAL IN
special_features
SECOND LEG BENT DOWNWARD 0.750 IN. WITH 2 HOLES 0.280 IN. NOM DIA IN
style_designator
DOUBLE ANGLE
second_leg_length
6.350 INCHES NOMINAL IN
surface_treatment
ENAMEL
NSN
5340-00-491-0341
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.950 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.370 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.260 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.125 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
1.950 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.370 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER
0.260 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS
0.125 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER
0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
TT-E-485 FED SPEC SINGLE TREATMENT RESPONSE OR TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CS-1300-0001?
CS-1300-0001 is a BRACKET,DOUBLE ANGLE.
What parts can replace CS-1300-0001?
There is 1 known substitute for CS-1300-0001: CPR102881. Substitute compatibility should be verified for your specific system.
What is the NSN for CS-1300-0001?
CS-1300-0001 is cataloged in the U.S. Government catalog under NSN 5340-00-491-0341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.