PartsTable
Technical Data Sheet
Download PDF

CRES1-72X1-8 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

CRES1-72X1-8: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.037 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN, thread_length: 0.125 INCHES MAXIMUM IN, screw_material: STEEL COMP 302. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-276-1398, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CRES1-72X1-8
NSN: 5305-00-276-1398
FSC: 5305 — Screws
CAGE: 70318 — ALLMETAL SCREW PRODUCTS CORP (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.037 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
thread_length0.125 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302
fastener_length0.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.073 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch72
NSN5305-00-276-1398
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: CRES1-72X1-8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.037 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.125 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.125 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.073 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.037 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.125 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.125 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.073 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 302
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 3
314101Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
0407-042Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
12-693-00-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CRES1-72X1-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CRES1-72X1-8?
CRES1-72X1-8 is a SCREW,MACHINE.
What parts can replace CRES1-72X1-8?
There are 3 known substitutes for CRES1-72X1-8: 314101, 0407-042, 12-693-00-000. Substitute compatibility should be verified for your specific system.
What is the NSN for CRES1-72X1-8?
CRES1-72X1-8 is cataloged in the U.S. Government catalog under NSN 5305-00-276-1398. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CRES1-72X1-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.