PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CR8MILG3278
CR8MILG3278 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, stud_length: 0.5000 INCHES NOMINAL IN, thread_class: 2A A, stud_diameter: 0.1900 INCHES NOMINAL IN, thread_length: 0.2500 INCHES NOMINAL IN, overall_length: 0.8750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1116, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CR8MILG3278
NSN: 3110-00-198-1116
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
stud_length0.5000 INCHES NOMINAL IN
thread_class2A A
stud_diameter0.1900 INCHES NOMINAL IN
thread_length0.2500 INCHES NOMINAL IN
overall_length0.8750 INCHES NOMINAL IN
outer_ring_width0.3440 INCHES NOMINAL IN
special_featuresMEANS FOR RELUBRICATION
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
lubrication_materialGREASE
NSN3110-00-198-1116
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CR8MILG3278 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
STUD DIAMETER: 0.1900 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.3440 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
STUD LENGTH: 0.5000 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESMEANS FOR RELUBRICATION
STUD DIAMETER0.1900 INCHES NOMINAL IN
OUTER RING WIDTH0.3440 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.190 INCHES IN
STUD LENGTH0.5000 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
THREAD QUANTITY PER INCH32
THREAD CLASS2A A
OVERALL LENGTH0.8750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
CR8Interchangeable
interchangeable cross-reference
interchangeable
A5220TSInterchangeable
interchangeable cross-reference
interchangeable
MCS5220Interchangeable
interchangeable cross-reference
interchangeable
G700001-1Interchangeable
interchangeable cross-reference
interchangeable
4106569Interchangeable
interchangeable cross-reference
interchangeable
C23Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CR8MILG3278?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CR8MILG3278?
CR8MILG3278 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace CR8MILG3278?
There are 15 known substitutes for CR8MILG3278: CR8, A5220TS, MCS5220 and 12 more. Substitute compatibility should be verified for your specific system.
Is CR8MILG3278 still available?
CR8MILG3278 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CR8MILG3278

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026