CR7340S06-16: RIVET,BLIND.
The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 MECHANICAL LOCK, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.969 INCHES MINIMUM AND 1.032 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, shear_strength: 3450 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-212-2008, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | IRON ALLOY 660 MECHANICAL LOCK |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.969 INCHES MINIMUM AND 1.032 INCHES MAXIMUM IN |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| shank_diameter | 0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| shear_strength | 3450 SINGLE POUNDS PER SQUARE INCH |
| fastener_length | 1.178 INCHES NOMINAL IN |
| expansion_device | SERRATED STEM-TYPE W |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| surface_treatment | CADMIUM OVERALL |
| head_major_diameter | 0.386 INCHES MAXIMUM IN |
| supplementary_features | STEM CADMIUM COAT UNBRIGTHENED CYANIDE SPECIFIED |
| NSN | 5320-01-212-2008 |
| SHANK DIAMETER | 0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| FASTENER LENGTH | 1.178 INCHES NOMINAL IN |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-81177 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SUPPLEMENTARY FEATURES | STEM CADMIUM COAT UNBRIGTHENED CYANIDE SPECIFIED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE MECHANICAL LOCK |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4027 NATIONAL SPEC 1ST MATERIAL RESPONSE OR AISI 4037 NATIONAL SPEC 2ND MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 8740 NATIONAL SPEC SINGLE MATERIAL RESPONSE STEM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SPECIFICATION/STANDARD DATA | 81755-C9502 MANUFACTURERS SPECIFICATION CONTROL AND 29666-OSB100-T MANUFACTURERS STANDARD |