CR3552PR-5-08 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

CR3552PR-5-08: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 COLLAR, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.173 INCHES NOMINAL IN, fastener_length: 0.621 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-717-5335, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

CR3552PR-5-08

NSN: 5320-01-717-5335
FSC: 5320 — Rivets
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)

SPECIFICATIONS

material	IRON ALLOY 660 COLLAR
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
shank_style	SELF-PLUGGING MECHANICALLY LOCKED STEM
shank_diameter	0.173 INCHES NOMINAL IN
fastener_length	0.621 INCHES NOMINAL IN
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	PASSIVATE COLLAR
head_major_diameter	0.286 INCHES NOMINAL IN
end_item_identification	C-5
material_document_and_classification	15-7 PH CRES PER AMS 5657 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE STEM
part_name_assigned_by_controlling_agency	CHERRYMAX RIVET OVERSIZE DIAMETER 100 DEG. FLUSH HEAD
NSN	5320-01-717-5335

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.173 INCHES NOMINAL IN

•

FASTENER LENGTH: 0.621 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2700 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE COLLAR

•

MATERIAL DOCUMENT AND CLASSIFICATION: 15-7 PH CRES PER AMS 5657 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE STEM

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.173 INCHES NOMINAL IN
FASTENER LENGTH	0.621 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2700 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE COLLAR
MATERIAL DOCUMENT AND CLASSIFICATION	15-7 PH CRES PER AMS 5657 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE STEM
MATERIAL DOCUMENT AND CLASSIFICATION	A-286 CRES PER AMS 5731 AND AMS 5737 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE COLLAR
MATERIAL DOCUMENT AND CLASSIFICATION	MONEL PER QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SHANK STYLE	SELF-PLUGGING MECHANICALLY LOCKED STEM
SURFACE TREATMENT	PASSIVATE COLLAR

SUBSTITUTES & CROSS-REFERENCES 1

CR3552Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy CR3552PR-5-08?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CR3552PR-5-08?

CR3552PR-5-08 is a RIVET,BLIND.

What parts can replace CR3552PR-5-08?

There is 1 known substitute for CR3552PR-5-08: CR3552. Substitute compatibility should be verified for your specific system.

What is the NSN for CR3552PR-5-08?

CR3552PR-5-08 is cataloged in the U.S. Government catalog under NSN 5320-01-717-5335. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CR3552PR-5-08 — RIVET,BLIND

Request a Quote — CR3552PR-5-08