PartsTable
Technical Data Sheet
Download PDF

CR29226 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CR29226: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM INTERNAL, seal_width: 0.375 INCHES NOMINAL IN, construction: SOLID, outside_diameter: 3.751 INCHES NOMINAL IN, accommodated_shaft_diameter: 2.938 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: DOUBLE LIP SEAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-694-3652, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CR29226
NSN: 5330-01-694-3652
FSC: 5330 — Packing and Gasket Materials
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM INTERNAL
seal_width0.375 INCHES NOMINAL IN
constructionSOLID
outside_diameter3.751 INCHES NOMINAL IN
accommodated_shaft_diameter2.938 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyDOUBLE LIP SEAL
NSN5330-01-694-3652
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CR29226 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.751 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 2.938 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.375 INCHES NOMINAL IN
OUTSIDE DIAMETER3.751 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER2.938 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYDOUBLE LIP SEAL
MATERIALSTEEL CASE
MATERIALRUBBER FLUOROCARBON CLASS FPM INTERNAL
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
HDW300-163-0032Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CR29226?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CR29226?
CR29226 is a SEAL,PLAIN ENCASED.
What parts can replace CR29226?
There is 1 known substitute for CR29226: HDW300-163-0032. Substitute compatibility should be verified for your specific system.
What is the NSN for CR29226?
CR29226 is cataloged in the U.S. Government catalog under NSN 5330-01-694-3652. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CR29226