CR2262-6-3: RIVET,BLIND.
The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5056 OR ALUMINUM ALLOY 7075 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, shear_strength: 596 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-067-6409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 5056 OR ALUMINUM ALLOY 7075 OVERALL |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| shank_diameter | 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| shear_strength | 596 SINGLE POUNDS PER SQUARE INCH |
| fastener_length | 0.350 INCHES NOMINAL IN |
| expansion_device | SERRATED STEM-TYPE W |
| countersink_angle | 100.0 DEGREES NOMINAL |
| surface_treatment | ANODIZE OR CHROMATE OVERALL |
| head_major_diameter | 0.349 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN |
| material_document_and_classification | QQ-A-430 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| NSN | 5320-01-067-6409 |
| SHANK DIAMETER | 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.350 INCHES NOMINAL IN |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| GRIP LENGTH | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| SURFACE TREATMENT | ANODIZE OR CHROMATE OVERALL |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
No substitute or cross-reference records for this part.