PartsTable
Technical Data Sheet

CR18/U3M050000 — CRYSTAL UNIT,QUARTZ

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

CR18/U3M050000: CRYSTAL UNIT,QUARTZ.

The CRYSTAL UNIT,QUARTZ is a the manufacturer industrial component. Key specifications include body_width: 0.725 INCHES MAXIMUM IN, body_length: 0.775 INCHES MAXIMUM IN, overall_width: 0.757 INCHES MAXIMUM IN, body_thickness: 0.317 INCHES MAXIMUM IN, overall_length: 1.023 INCHES MAXIMUM IN, terminal_length: 0.238 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5955-00-892-3444, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CR18/U3M050000
NSN: 5955-00-892-3444
FSC: 5955 — Oscillators and Piezoelectric Crystals
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_width0.725 INCHES MAXIMUM IN
body_length0.775 INCHES MAXIMUM IN
overall_width0.757 INCHES MAXIMUM IN
body_thickness0.317 INCHES MAXIMUM IN
overall_length1.023 INCHES MAXIMUM IN
terminal_length0.238 INCHES NOMINAL IN
style_designatorOVAL BODY, PIN TERMINALS
circuit_resonanceANTIRESONANCE
overall_thickness0.352 INCHES MAXIMUM IN
terminal_diameter0.050 INCHES NOMINAL IN
drive_level_rating10.0 MILLIWATTS NOMINAL AND 8.0 MILLIWATTS MINIMUM AND 12.0 MILLIWATTS MAXIMUM
mode_of_oscillationFUNDAMENTAL
NSN5955-00-892-3444
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CRYSTAL UNIT,QUARTZ TITLE COMPONENT PN CR18/U3M050000 MFR CRYSTAL UNIT,QUARTZ
KEY FEATURES
•
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT: -0.005 TO 0.005
•
TERMINAL DIAMETER: 0.050 INCHES NOMINAL IN
•
TERMINAL LENGTH: 0.238 INCHES NOMINAL IN
•
MODE OF OSCILLATION: FUNDAMENTAL
•
BODY WIDTH: 0.725 INCHES MAXIMUM IN
•
EQUIVALENT RESISTANCE VALUE IN OHMS: 110.0 NOMINAL
•
OVERALL THICKNESS: 0.352 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OVAL BODY, PIN TERMINALS
TECHNICAL CHARACTERISTICS
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT-0.005 TO 0.005
TERMINAL DIAMETER0.050 INCHES NOMINAL IN
TERMINAL LENGTH0.238 INCHES NOMINAL IN
MODE OF OSCILLATIONFUNDAMENTAL
BODY WIDTH0.725 INCHES MAXIMUM IN
EQUIVALENT RESISTANCE VALUE IN OHMS110.0 NOMINAL
OVERALL THICKNESS0.352 INCHES MAXIMUM IN
STYLE DESIGNATOROVAL BODY, PIN TERMINALS
OVERALL LENGTH1.023 INCHES MAXIMUM IN
OVERALL WIDTH0.757 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
290-8754-00Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-C-3098/3Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-PRF-3098/3Reference document
Same NSN cross-reference
Reference document — Identification reference
117837Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CR18/U3M050000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CR18/U3M050000?
CR18/U3M050000 is a CRYSTAL UNIT,QUARTZ.
What parts can replace CR18/U3M050000?
There are 4 known substitutes for CR18/U3M050000: 290-8754-00, MIL-C-3098/3, MIL-PRF-3098/3 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CR18/U3M050000?
CR18/U3M050000 is cataloged in the U.S. Government catalog under NSN 5955-00-892-3444. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CR18/U3M050000