PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CR122524PC107
CR122524PC107 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 70.0 SHORE DUROMETER A MAXIMUM OVERALL, rim_surface_width: 0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN, inner_groove_width: 0.126 INCHES NOMINAL IN, peripheral_diameter: 3.000 INCHES MINIMUM AND 3.016 INCHES MAXIMUM IN, center_hole_diameter: 2.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-290-9442, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CR122524PC107
NSN: 5330-00-290-9442
FSC: 5330
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating70.0 SHORE DUROMETER A MAXIMUM OVERALL
rim_surface_width0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
inner_groove_width0.126 INCHES NOMINAL IN
peripheral_diameter3.000 INCHES MINIMUM AND 3.016 INCHES MAXIMUM IN
center_hole_diameter2.625 INCHES NOMINAL IN
cross-sectional_height0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-290-9442
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CR122524PC107 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER GROOVE WIDTH: 0.126 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 3.000 INCHES MINIMUM AND 3.016 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CENTER HOLE DIAMETER: 2.625 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
INNER GROOVE WIDTH0.126 INCHES NOMINAL IN
PERIPHERAL DIAMETER3.000 INCHES MINIMUM AND 3.016 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
CENTER HOLE DIAMETER2.625 INCHES NOMINAL IN
RIM SURFACE WIDTH0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
A51J9000-3Interchangeable
interchangeable cross-reference
interchangeable
42325Interchangeable
interchangeable cross-reference
interchangeable
2SC372Interchangeable
interchangeable cross-reference
interchangeable
35264Interchangeable
interchangeable cross-reference
interchangeable
NAS907 TYFSZYInterchangeable
interchangeable cross-reference
interchangeable
NAS907Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CR122524PC107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CR122524PC107?
CR122524PC107 is a PACKING,PREFORMED.
What parts can replace CR122524PC107?
There are 19 known substitutes for CR122524PC107: A51J9000-3, 42325, 2SC372 and 16 more. Substitute compatibility should be verified for your specific system.
Is CR122524PC107 still available?
CR122524PC107 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CR122524PC107

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026