PartsTable
Technical Data Sheet

CR-64/U-3.072 — CRYSTAL UNIT,QUARTZ

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

CR-64/U-3.072: CRYSTAL UNIT,QUARTZ.

The CRYSTAL UNIT,QUARTZ is a the manufacturer industrial component. Key specifications include body_width: 0.402 INCHES MAXIMUM IN, overall_width: 0.435 INCHES MAXIMUM IN, body_thickness: 0.150 INCHES MAXIMUM IN, overall_length: 0.530 INCHES MAXIMUM IN, terminal_length: 1.500 INCHES MINIMUM IN, special_features: THIRD WIRE LEAD LOCATED ON TOP OF CASE. This part is cataloged in the U.S.

Government catalog under NSN 5955-01-205-4532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CR-64/U-3.072
NSN: 5955-01-205-4532
FSC: 5955 — Oscillators and Piezoelectric Crystals
CAGE: 60548 — SEI DIV SAUER INDUSTRIES (USA)
SPECIFICATIONS
body_width0.402 INCHES MAXIMUM IN
overall_width0.435 INCHES MAXIMUM IN
body_thickness0.150 INCHES MAXIMUM IN
overall_length0.530 INCHES MAXIMUM IN
terminal_length1.500 INCHES MINIMUM IN
special_featuresTHIRD WIRE LEAD LOCATED ON TOP OF CASE
style_designatorOVAL BODY, WIRE LEADS
circuit_resonanceANTIRESONANCE
overall_thickness0.183 INCHES MAXIMUM IN
terminal_diameter0.017 INCHES NOMINAL IN
drive_level_rating5.0 MILLIWATTS NOMINAL
mode_of_oscillationFUNDAMENTAL
NSN5955-01-205-4532
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CRYSTAL UNIT,QUARTZ TITLE COMPONENT PN CR-64/U-3.072 MFR CRYSTAL UNIT,QUARTZ
KEY FEATURES
•
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT: -0.005 TO 0.005
•
TERMINAL DIAMETER: 0.017 INCHES NOMINAL IN
•
TERMINAL LENGTH: 1.500 INCHES MINIMUM IN
•
MODE OF OSCILLATION: FUNDAMENTAL
•
BODY WIDTH: 0.402 INCHES MAXIMUM IN
•
EQUIVALENT RESISTANCE VALUE IN OHMS: 180.0 MAXIMUM
•
OVERALL THICKNESS: 0.183 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OVAL BODY, WIRE LEADS
TECHNICAL CHARACTERISTICS
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT-0.005 TO 0.005
TERMINAL DIAMETER0.017 INCHES NOMINAL IN
TERMINAL LENGTH1.500 INCHES MINIMUM IN
MODE OF OSCILLATIONFUNDAMENTAL
BODY WIDTH0.402 INCHES MAXIMUM IN
EQUIVALENT RESISTANCE VALUE IN OHMS180.0 MAXIMUM
OVERALL THICKNESS0.183 INCHES MAXIMUM IN
STYLE DESIGNATOROVAL BODY, WIRE LEADS
OVERALL LENGTH0.530 INCHES MAXIMUM IN
OVERALL WIDTH0.435 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
900780-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation + specific procedure
Ready to buy CR-64/U-3.072?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CR-64/U-3.072?
CR-64/U-3.072 is a CRYSTAL UNIT,QUARTZ.
What parts can replace CR-64/U-3.072?
There is 1 known substitute for CR-64/U-3.072: 900780-001. Substitute compatibility should be verified for your specific system.
What is the NSN for CR-64/U-3.072?
CR-64/U-3.072 is cataloged in the U.S. Government catalog under NSN 5955-01-205-4532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CR-64/U-3.072