PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CR-23046 P2
CR-23046 P2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.344 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 3.066 INCHES NOMINAL IN, special_features: WITH PROTECTIVE INNER CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-470-5481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CR-23046 P2
NSN: 5330-00-470-5481
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.344 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter3.066 INCHES NOMINAL IN
special_featuresWITH PROTECTIVE INNER CASE
surface_treatmentPLASTIC CASE
housing_bore_diameter3.061 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.312 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-470-5481
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CR-23046 P2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
SURFACE TREATMENT: PLASTIC CASE
•
CASE STYLE: SQUARE
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 3.061 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
SURFACE TREATMENTPLASTIC CASE
CASE STYLESQUARE
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
HOUSING BORE DIAMETER3.061 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
OUTSIDE DIAMETER3.066 INCHES NOMINAL IN
SPECIAL FEATURESWITH PROTECTIVE INNER CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MS51957-30Interchangeable
interchangeable cross-reference
interchangeable
935.63.11.437Interchangeable
interchangeable cross-reference
interchangeable
330-3059-350Interchangeable
interchangeable cross-reference
interchangeable
23046Interchangeable
interchangeable cross-reference
interchangeable
6C605Interchangeable
interchangeable cross-reference
interchangeable
499295Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CR-23046 P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CR-23046 P2?
CR-23046 P2 is a SEAL,PLAIN ENCASED.
What parts can replace CR-23046 P2?
There are 14 known substitutes for CR-23046 P2: MS51957-30, 935.63.11.437, 330-3059-350 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CR-23046 P2?
CR-23046 P2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-470-5481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CR-23046 P2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026