The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5056 SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN, fastener_length: 0.377 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5320-01-136-1785, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 5056 SLEEVE |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| shank_diameter | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN |
| fastener_length | 0.377 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN |
| expansion_device | SERRATED STEM-TYPE W |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| surface_treatment | CADMIUM AND CHROMATE STEM |
| head_major_diameter | 0.357 INCHES MAXIMUM IN |
| material_document_and_classification | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| surface_treatment_document_and_classification | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| NSN | 5320-01-136-1785 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| MATERIAL | STEEL COMP 8740 STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| SPECIAL FEATURES | "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. |
| MATERIAL | ALUMINUM ALLOY 5056 SLEEVE |
| SURFACE TREATMENT | CHROMATE SLEEVE |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD MAJOR DIAMETER | 0.357 INCHES MAXIMUM IN |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |