PartsTable
Technical Data Sheet

CR-2-1/2-XBEC — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

CR-2-1/2-XBEC: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON SEAL, stud_length: 2.2500 INCHES NOMINAL IN, thread_class: 3A A, stud_diameter: 1.0000 INCHES NOMINAL IN, thread_length: 1.1250 INCHES NOMINAL IN, overall_length: 3.7500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-395-7968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CR-2-1/2-XBEC
NSN: 3110-01-395-7968
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 07484 — ACCURATE BUSHING COMPANY, INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON SEAL
stud_length2.2500 INCHES NOMINAL IN
thread_class3A A
stud_diameter1.0000 INCHES NOMINAL IN
thread_length1.1250 INCHES NOMINAL IN
overall_length3.7500 INCHES NOMINAL IN
outer_ring_width1.5000 INCHES NOMINAL IN
special_featuresCROWNED OUTER RING, ECCENTRIC BUSHING ON STUD
style_designatorCAM FOLLOWER
surface_treatmentOXIDE EXPOSED SURFACES AS MOUNTED
nominal_thread_size1.0000 INCHES IN
overall_outside_diameter2.5000 INCHES NOMINAL IN
NSN3110-01-395-7968
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CR-2-1/2-XBEC · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 1.5000 INCHES NOMINAL IN
•
THREAD LENGTH: 1.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 2.5000 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 1.0000 INCHES IN
•
STUD LENGTH: 2.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH1.5000 INCHES NOMINAL IN
THREAD LENGTH1.1250 INCHES NOMINAL IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH3.7500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.5000 INCHES NOMINAL IN
NOMINAL THREAD SIZE1.0000 INCHES IN
STUD LENGTH2.2500 INCHES NOMINAL IN
SPECIAL FEATURESCROWNED OUTER RING, ECCENTRIC BUSHING ON STUD
SURFACE TREATMENTOXIDE EXPOSED SURFACES AS MOUNTED
THREAD CLASS3A A
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
701-6776765 PART NO. 30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CR-2-1/2-XBEC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CR-2-1/2-XBEC?
CR-2-1/2-XBEC is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace CR-2-1/2-XBEC?
There is 1 known substitute for CR-2-1/2-XBEC: 701-6776765 PART NO. 30. Substitute compatibility should be verified for your specific system.
What is the NSN for CR-2-1/2-XBEC?
CR-2-1/2-XBEC is cataloged in the U.S. Government catalog under NSN 3110-01-395-7968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CR-2-1/2-XBEC