PartsTable
Technical Data Sheet
Download PDF

CPR103893 — DISK,SOLID,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CPR103893: DISK,SOLID,PLAIN.

The DISK,SOLID,PLAIN is a the manufacturer industrial component. Key specifications include diameter: 0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, material: RUBBER SYNTHETIC, thickness: 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, material_document_and_classification: MIL-STD-417, GRADE SB915A1B1E3F1 MIL STD SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-279-8431, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CPR103893
NSN: 5330-00-279-8431
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
materialRUBBER SYNTHETIC
thickness0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
material_document_and_classificationMIL-STD-417, GRADE SB915A1B1E3F1 MIL STD SINGLE MATERIAL RESPONSE
NSN5330-00-279-8431
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CPR103893 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-STD-417, GRADE SB915A1B1E3F1 MIL STD SINGLE MATERIAL RESPONSE
•
DIAMETER: 0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
THICKNESS: 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-STD-417, GRADE SB915A1B1E3F1 MIL STD SINGLE MATERIAL RESPONSE
DIAMETER0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
THICKNESS0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
5330002798431Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy CPR103893?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CPR103893?
CPR103893 is a DISK,SOLID,PLAIN.
What parts can replace CPR103893?
There is 1 known substitute for CPR103893: 5330002798431. Substitute compatibility should be verified for your specific system.
What is the NSN for CPR103893?
CPR103893 is cataloged in the U.S. Government catalog under NSN 5330-00-279-8431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CPR103893