CPR101100 — PIN,GROOVED,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

CPR101100: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 1.246 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, material: STEEL COMP 4140 OR STEEL COMP 8640 OVERALL, overall_length: 6.090 INCHES MINIMUM AND 6.120 INCHES MAXIMUM IN, undercut_width: 0.056 INCHES NOMINAL IN, first_end_style: CHAMFERED, hardness_rating: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-238-9241, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

CPR101100

NSN: 5315-00-238-9241
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

diameter	1.246 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
material	STEEL COMP 4140 OR STEEL COMP 8640 OVERALL
overall_length	6.090 INCHES MINIMUM AND 6.120 INCHES MAXIMUM IN
undercut_width	0.056 INCHES NOMINAL IN
first_end_style	CHAMFERED
hardness_rating	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
effective_length	5.750 INCHES MINIMUM AND 5.780 INCHES MAXIMUM IN
style_designator	GROOVE
surface_treatment	CADMIUM OVERALL
undercut_diameter	1.172 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN
first_end_location	BOTH ENDS
first_end_taper_angle	45.0 DEGREES NOMINAL
NSN	5315-00-238-9241

COMPONENT DIAGRAM

KEY FEATURES

•

UNDERCUT WIDTH: 0.056 INCHES NOMINAL IN

•

FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL IN

•

UNDERCUT DIAMETER: 1.172 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN

•

FIRST END LOCATION: BOTH ENDS

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

FIRST END STYLE: CHAMFERED

•

HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL

•

STYLE DESIGNATOR: GROOVE

TECHNICAL CHARACTERISTICS

UNDERCUT WIDTH	0.056 INCHES NOMINAL IN
FIRST END TAPER LENGTH	0.060 INCHES NOMINAL IN
UNDERCUT DIAMETER	1.172 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN
FIRST END LOCATION	BOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLE	CHAMFERED
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATOR	GROOVE
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-624 FED SPEC ALL MATERIAL RESPONSES OVERALL
DIAMETER	1.246 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

5315002389241Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy CPR101100?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CPR101100?

CPR101100 is a PIN,GROOVED,HEADLESS.

What parts can replace CPR101100?

There is 1 known substitute for CPR101100: 5315002389241. Substitute compatibility should be verified for your specific system.

What is the NSN for CPR101100?

CPR101100 is cataloged in the U.S. Government catalog under NSN 5315-00-238-9241. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CPR101100 — PIN,GROOVED,HEADLESS

Request a Quote — CPR101100