PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CPR100464
CPR100464 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, construction: ONE-PIECE, outside_diameter: 3.090 INCHES NOMINAL IN, retainer_thickness: 0.160 INCHES NOMINAL IN, packing_inside_diameter: 1.810 INCHES NOMINAL IN, retainer_inside_diameter: 2.440 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-024-3377, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CPR100464
NSN: 5330-01-024-3377
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL RETAINER
constructionONE-PIECE
outside_diameter3.090 INCHES NOMINAL IN
retainer_thickness0.160 INCHES NOMINAL IN
packing_inside_diameter1.810 INCHES NOMINAL IN
retainer_inside_diameter2.440 INCHES NOMINAL IN
packing_ring_cross-sectional_diameter0.220 INCHES NOMINAL IN
NSN5330-01-024-3377
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CPR100464 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING INSIDE DIAMETER: 1.810 INCHES NOMINAL IN
•
MATERIAL: WOOL PACKING
•
CONSTRUCTION: ONE-PIECE
•
OUTSIDE DIAMETER: 3.090 INCHES NOMINAL IN
•
RETAINER THICKNESS: 0.160 INCHES NOMINAL IN
•
RETAINER INSIDE DIAMETER: 2.440 INCHES NOMINAL IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.220 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PACKING INSIDE DIAMETER1.810 INCHES NOMINAL IN
MATERIALWOOL PACKING
MATERIALSTEEL RETAINER
CONSTRUCTIONONE-PIECE
OUTSIDE DIAMETER3.090 INCHES NOMINAL IN
RETAINER THICKNESS0.160 INCHES NOMINAL IN
RETAINER INSIDE DIAMETER2.440 INCHES NOMINAL IN
PACKING RING CROSS-SECTIONAL DIAMETER0.220 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
45229Interchangeable
interchangeable cross-reference
interchangeable
17-003-008-009Interchangeable
interchangeable cross-reference
interchangeable
17-003-008Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-11Interchangeable
interchangeable cross-reference
interchangeable
745-1363-000Interchangeable
interchangeable cross-reference
interchangeable
R820105 PIECE 10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CPR100464?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CPR100464?
CPR100464 is a PACKING WITH RETAINER.
What parts can replace CPR100464?
There are 9 known substitutes for CPR100464: 45229, 17-003-008-009, 17-003-008 and 6 more. Substitute compatibility should be verified for your specific system.
Is CPR100464 still available?
CPR100464 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CPR100464

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026