PartsTable / COMPONENT / CPC1949-9
CPC1949-9
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-257-0044, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
CPC1949-9
NSN: 5340-00-257-0044 FSC: 5340 CAGE: 71616 — COMMERCIAL PLASTICS CO INC (USA)
SPECIFICATIONS
diameter 0.204 INCHES NOMINAL IN material PLASTIC BAND overall_width 0.500 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.062 INCHES NOMINAL IN loop_inside_diameter 0.563 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.843 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.625 INCHES NOMINAL IN NSN 5340-00-257-0044
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: CPC1949-9
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• DIAMETER: 0.204 INCHES NOMINAL IN
• LOOP INSIDE DIAMETER: 0.563 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.625 INCHES NOMINAL IN
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.843 INCHES NOMINAL IN
• STYLE DESIGNATOR: SINGLE LOOP
• TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER 0.204 INCHES NOMINAL IN LOOP INSIDE DIAMETER 0.563 INCHES NOMINAL IN OVERALL WIDTH 0.500 INCHES NOMINAL IN MATERIAL PLASTIC BAND CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.625 INCHES NOMINAL IN DISTANCE FROM LOOP CENTER TO TONGUE END 0.843 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP TONGUE HOLE TYPE ROUND, UNTHREADED MATERIAL THICKNESS 0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
999 Upgraded Successor successor cross-reference
successor
2B Upgraded Successor successor cross-reference
successor
14 Upgraded Successor successor cross-reference
successor
9 Upgraded Successor successor cross-reference
successor
SIZE9 Upgraded Successor successor cross-reference
successor
28901-14 Upgraded Successor successor cross-reference
successor
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy CPC1949-9?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CPC1949-9?
CPC1949-9 is a CLAMP,LOOP.
What parts can replace CPC1949-9?
There are 18 known substitutes for CPC1949-9: 999, 2B, 14 and 15 more. Substitute compatibility should be verified for your specific system.
Is CPC1949-9 still available?
CPC1949-9 is currently cancelled.
Request a Quote — CPC1949-9