PartsTable
Technical Data Sheet
CPA1417-8N2 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CASTER,SWIVEL is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TREAD, wheel_type: BUILT UP, plate_style: RECTANGULAR, tread_width: 2.000 INCHES NOMINAL IN, wheel_diameter: 8.000 INCHES NOMINAL IN, effective_height: 9.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-820-8807, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CPA1417-8N2
NSN: 5340-00-820-8807
FSC: 5340
CAGE: 21672 — FKI INDUSTRIES INC DBA FAULTLESS CASTER DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TREAD
wheel_typeBUILT UP
plate_styleRECTANGULAR
tread_width2.000 INCHES NOMINAL IN
wheel_diameter8.000 INCHES NOMINAL IN
wheel_quantity1
effective_height9.500 INCHES NOMINAL IN
style_designatorSWIVEL OFFSET
features_providedAXLE LUBRICATION FITTING AND BRAKE LOCK
surface_treatmentENAMEL PLATE
caster_plate_width5.000 INCHES NOMINAL IN
wheel_bearing_typeANNULAR BALL
NSN5340-00-820-8807
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CPA1417-8N2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
FEATURES PROVIDED: AXLE LUBRICATION FITTING AND BRAKE LOCK
TREAD WIDTH: 2.000 INCHES NOMINAL IN
SURFACE TREATMENT: ENAMEL PLATE
STYLE DESIGNATOR: SWIVEL OFFSET
MATERIAL: STEEL BODY
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDAXLE LUBRICATION FITTING AND BRAKE LOCK
TREAD WIDTH2.000 INCHES NOMINAL IN
SURFACE TREATMENTENAMEL PLATE
STYLE DESIGNATORSWIVEL OFFSET
MATERIALSTEEL BODY
SURFACE TREATMENTENAMEL WHEEL RIM
MATERIALALUMINUM ALLOY WHEEL RIM
SURFACE TREATMENTENAMEL BODY
MATERIALRUBBER SYNTHETIC TREAD
MATERIALSTEEL PLATE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
6624-3Upgraded Successor
successor cross-reference
successor
1015Upgraded Successor
successor cross-reference
successor
8105402Upgraded Successor
successor cross-reference
successor
7010-7830-400Interchangeable
interchangeable cross-reference
interchangeable
CP917-8NX2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CPA1417-8N2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CPA1417-8N2?
CPA1417-8N2 is a CASTER,SWIVEL.
What parts can replace CPA1417-8N2?
There are 5 known substitutes for CPA1417-8N2: 6624-3, 1015, 8105402 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CPA1417-8N2?
CPA1417-8N2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-820-8807. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CPA1417-8N2