PartsTable
Technical Data Sheet
PartsTable / MRO / CP70E1FG156K1
CP70E1FG156K1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include body_style: W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE, body_width: 2.500 INCHES NOMINAL IN, body_height: 4.750 INCHES NOMINAL IN, body_length: 3.750 INCHES NOMINAL IN, features_provided: HERMETICALLY SEALED CASE, reliability_indicator: NOT ESTABLISHED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-161-6415, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CP70E1FG156K1
NSN: 5910-00-161-6415
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleW/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE
body_width2.500 INCHES NOMINAL IN
body_height4.750 INCHES NOMINAL IN
body_length3.750 INCHES NOMINAL IN
features_providedHERMETICALLY SEALED CASE
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_height_from_body1.375 INCHES MAXIMUM IN
terminal_type_and_quantity2 SOLDER STUD
tolerance_range_per_section-10.00 TO 10.00 PERCENT SINGLE SECTION
schematic_diagram_designatorNO COMMON OR GROUNDED ELECTRODE(S)
capacitance_value_per_section15.000 MICROFARADS SINGLE SECTION
NSN5910-00-161-6415
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,PAPER DIELECTRIC TITLE COMPONENT PN CP70E1FG156K1 MFR CAPACITOR,FIXED,PAPER
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH: 2.000 INCHES NOMINAL IN
•
BODY STYLE: W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE
•
TERMINAL TYPE AND QUANTITY: 2 SOLDER STUD
•
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT: 1.5000
•
TEST DATA DOCUMENT: 81349-MIL-C-25 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
INSULATION RESISTANCE AT REFERENCE TEMP: 1500.0 MEGOHM-MICROFARADS
•
FEATURES PROVIDED: HERMETICALLY SEALED CASE
•
NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH2.000 INCHES NOMINAL IN
BODY STYLEW/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE
TERMINAL TYPE AND QUANTITY2 SOLDER STUD
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT1.5000
TEST DATA DOCUMENT81349-MIL-C-25 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
INSULATION RESISTANCE AT REFERENCE TEMP1500.0 MEGOHM-MICROFARADS
FEATURES PROVIDEDHERMETICALLY SEALED CASE
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
CAPACITANCE VALUE PER SECTION15.000 MICROFARADS SINGLE SECTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
9105Interchangeable
interchangeable cross-reference
interchangeable
53105Interchangeable
interchangeable cross-reference
interchangeable
360-0270Interchangeable
interchangeable cross-reference
interchangeable
CC51Interchangeable
interchangeable cross-reference
interchangeable
419-333Interchangeable
Tweezers,craftsman's
interchangeable
31B431Interchangeable
Tweezers,craftsman's
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CP70E1FG156K1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CP70E1FG156K1?
CP70E1FG156K1 is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace CP70E1FG156K1?
There are 10 known substitutes for CP70E1FG156K1: 9105, 53105, 360-0270 and 7 more. Substitute compatibility should be verified for your specific system.
Is CP70E1FG156K1 still available?
CP70E1FG156K1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CP70E1FG156K1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026