PartsTable
Technical Data Sheet
Download PDF

CP13-S77 — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CP13-S77: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.420 INCHES NOMINAL IN, material: PLASTIC SILICONE CUP, load_rating: 5.0 POUNDS MAXIMUM LBS, flange_width: 2.380 INCHES NOMINAL IN, flange_length: 2.380 INCHES NOMINAL IN, inside_diameter: 0.270 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-662-9324, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CP13-S77
NSN: 5340-01-662-9324
FSC: 5340 — Hardware, Commercial
CAGE: 0LRN7 — SHOCK TECH INC DBA SHOCK TECH INC (USA)
SPECIFICATIONS
height1.420 INCHES NOMINAL IN
materialPLASTIC SILICONE CUP
load_rating5.0 POUNDS MAXIMUM LBS
flange_width2.380 INCHES NOMINAL IN
flange_length2.380 INCHES NOMINAL IN
inside_diameter0.270 INCHES NOMINAL IN
flange_thickness0.080 INCHES NOMINAL IN
special_featuresNATURAL FREQUENCY: 10-25HZ; AXIAL/RADIAL FREQUENCY RATIO: 1:1 APPROX; OPERATING TEMP: M67/P300 DEG F; FUNGUS AND OZONE RESISTANT
style_designatorROUND W/BUSHING FOUR-HOLE FLANGE
end_item_identification2350-015770830
distance_from_flange_to_end0.870 INCHES NOMINAL IN
flange_mounting_hole_diameter0.220 INCHES NOMINAL IN
NSN5340-01-662-9324
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CP13-S77 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE MOUNTING HOLE DIAMETER: 0.220 INCHES NOMINAL IN
•
LOAD RATING: 5.0 POUNDS MAXIMUM LBS
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.940 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.080 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND W/BUSHING FOUR-HOLE FLANGE
•
FLANGE LENGTH: 2.380 INCHES NOMINAL IN
•
DISTANCE FROM FLANGE TO END: 0.870 INCHES NOMINAL IN
•
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.940 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE MOUNTING HOLE DIAMETER0.220 INCHES NOMINAL IN
LOAD RATING5.0 POUNDS MAXIMUM LBS
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.940 INCHES NOMINAL IN
FLANGE THICKNESS0.080 INCHES NOMINAL IN
STYLE DESIGNATORROUND W/BUSHING FOUR-HOLE FLANGE
FLANGE LENGTH2.380 INCHES NOMINAL IN
DISTANCE FROM FLANGE TO END0.870 INCHES NOMINAL IN
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS1.940 INCHES NOMINAL IN
INSIDE DIAMETER0.270 INCHES NOMINAL IN
HEIGHT1.420 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CP13-S77?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CP13-S77?
CP13-S77 is a MOUNT,RESILIENT,UTILITY.
What is the NSN for CP13-S77?
CP13-S77 is cataloged in the U.S. Government catalog under NSN 5340-01-662-9324. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CP13-S77

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.