PartsTable
Technical Data Sheet
Download PDF

COV1713Z1-10 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

COV1713Z1-10: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.75 INCHES NOMINAL IN, overall_length: 2.00 INCHES NOMINAL IN, special_features: TEMP RATED FROM MINUS 30 F TO 180 F, style_designator: SINGLE LOOP, lug_hole_diameter: 0.2031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-621-0195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
COV1713Z1-10
NSN: 5340-01-621-0195
FSC: 5340 — Hardware, Commercial
CAGE: 76839 — PROSPECT FASTENER CORP. (USA)
SPECIFICATIONS
materialSTEEL BAND
overall_width0.75 INCHES NOMINAL IN
overall_length2.00 INCHES NOMINAL IN
special_featuresTEMP RATED FROM MINUS 30 F TO 180 F
style_designatorSINGLE LOOP
lug_hole_diameter0.2031 INCHES NOMINAL IN
material_thickness0.469 INCHES NOMINAL IN
loop_inside_diameter1.00 INCHES NOMINAL IN
end_item_identification6115-01-613-2486
NSN5340-01-621-0195
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: COV1713Z1-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.2031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.469 INCHES NOMINAL IN
•
MATERIAL: PLASTIC VINYL CUSHION
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.2031 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
OVERALL LENGTH2.00 INCHES NOMINAL IN
OVERALL WIDTH0.75 INCHES NOMINAL IN
MATERIAL THICKNESS0.469 INCHES NOMINAL IN
SPECIAL FEATURESTEMP RATED FROM MINUS 30 F TO 180 F
END ITEM IDENTIFICATION6115-01-613-2486
MATERIALPLASTIC VINYL CUSHION
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER1.00 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
8863T78Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy COV1713Z1-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is COV1713Z1-10?
COV1713Z1-10 is a CLAMP,LOOP.
What parts can replace COV1713Z1-10?
There is 1 known substitute for COV1713Z1-10: 8863T78. Substitute compatibility should be verified for your specific system.
What is the NSN for COV1713Z1-10?
COV1713Z1-10 is cataloged in the U.S. Government catalog under NSN 5340-01-621-0195. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — COV1713Z1-10