PartsTable
Technical Data Sheet
PartsTable / COMPONENT / COR10-10
COR10-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 4.7500 INCHES NOMINAL IN, material: ALUMINUM, overall_height: 0.7500 INCHES NOMINAL IN, stock_diameter: 0.0937 INCHES NOMINAL IN, surface_treatment: ANODIZE, casehardening_indicator: NOT CASEHARDENED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-424-3042, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
COR10-10
NSN: 5340-01-424-3042
FSC: 5340
CAGE: 08730 — VEMALINE PRODUCTS INC DBA HANDLES UNLIMITED DIV HANDLES UNLIMITED (USA)
SPECIFICATIONS
width4.7500 INCHES NOMINAL IN
materialALUMINUM
overall_height0.7500 INCHES NOMINAL IN
stock_diameter0.0937 INCHES NOMINAL IN
surface_treatmentANODIZE
casehardening_indicatorNOT CASEHARDENED
NSN5340-01-424-3042
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: COR10-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM
•
SURFACE TREATMENT: ANODIZE
•
STOCK DIAMETER: 0.0937 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
WIDTH: 4.7500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM
SURFACE TREATMENTANODIZE
STOCK DIAMETER0.0937 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
OVERALL HEIGHT0.7500 INCHES NOMINAL IN
WIDTH4.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
N7475BInterchangeable
interchangeable cross-reference
interchangeable
658025Interchangeable
interchangeable cross-reference
interchangeable
SN4463Interchangeable
interchangeable cross-reference
interchangeable
856247Interchangeable
interchangeable cross-reference
interchangeable
7374712Interchangeable
interchangeable cross-reference
interchangeable
25731Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy COR10-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is COR10-10?
COR10-10 is a CLIP,RETAINING.
What parts can replace COR10-10?
There are 6 known substitutes for COR10-10: N7475B, 658025, SN4463 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for COR10-10?
COR10-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-424-3042. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — COR10-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026