PartsTable
Technical Data Sheet
Download PDF

COM8530 — COM8530

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

COM8530: COM8530.

The COM8530 is a the manufacturer industrial component. Key specifications include material: STEEL LOCATION NOT OTHERWISE SPECIFIED, head_style: FLAT, sterilized: NO, point_style: DIAMOND, shank_style: SMOOTH ROUND, head_diameter: 0.281 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-753-3882, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
COM8530
NSN: 5315-00-753-3882
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 83752 — MAZE NAILS DIV OF MAZE W H CO (USA)
SPECIFICATIONS
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
head_styleFLAT
sterilizedNO
point_styleDIAMOND
shank_styleSMOOTH ROUND
head_diameter0.281 INCHES NOMINAL IN
shank_diameter0.131 INCHES NOMINAL IN
decorative_headNO
fastener_length2.500 INCHES NOMINAL IN
fabrication_methodCOLD FORMED
unpackaged_unit_weight5.000 POUNDS LBS
criticality_code_justificationAWJN
NSN5315-00-753-3882
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: COM8530 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DECORATIVE HEAD: NO
•
SHANK DIAMETER: 0.131 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.500 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: AWJN
•
HEAD STYLE: FLAT
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY PKG DATA
•
POINT STYLE: DIAMOND
•
SHANK STYLE: SMOOTH ROUND
TECHNICAL CHARACTERISTICS
DECORATIVE HEADNO
SHANK DIAMETER0.131 INCHES NOMINAL IN
FASTENER LENGTH2.500 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONAWJN
HEAD STYLEFLAT
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY PKG DATA
POINT STYLEDIAMOND
SHANK STYLESMOOTH ROUND
STERILIZEDNO
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
SUBSTITUTES & CROSS-REFERENCES 6
FF-N-105 TY2ST10SZ2-1/2X.131IN.Reference document
Same NSN cross-reference
Reference document — Secondary reference
ASTM-F1667 NL CM S-07BReference document
Same NSN cross-reference
Reference document — Design control — primary reference
COM8050Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS90713-7 SZ2-1/2 L X .131IN. D.Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-N-105Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS90713-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy COM8530?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is COM8530?
COM8530 is a COM8530.
What parts can replace COM8530?
There are 6 known substitutes for COM8530: FF-N-105 TY2ST10SZ2-1/2X.131IN., ASTM-F1667 NL CM S-07B, COM8050 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for COM8530?
COM8530 is cataloged in the U.S. Government catalog under NSN 5315-00-753-3882. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — COM8530