PartsTable
Technical Data Sheet
Download PDF

COM10530 — COM10530

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

COM10530: COM10530.

The COM10530 is a the manufacturer industrial component. Key specifications include material: STEEL LOCATION NOT OTHERWISE SPECIFIED, head_style: FLAT, sterilized: NO, point_style: DIAMOND, shank_style: SMOOTH ROUND, head_diameter: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-753-3883, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
COM10530
NSN: 5315-00-753-3883
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 83752 — MAZE NAILS DIV OF MAZE W H CO (USA)
SPECIFICATIONS
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
head_styleFLAT
sterilizedNO
point_styleDIAMOND
shank_styleSMOOTH ROUND
head_diameter0.312 INCHES NOMINAL IN
shank_diameter0.148 INCHES NOMINAL IN
decorative_headNO
fastener_length3.000 INCHES NOMINAL IN
fabrication_methodCOLD FORMED
unpackaged_unit_weight5.000 POUNDS LBS
NSN5315-00-753-3883
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: COM10530 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DECORATIVE HEAD: NO
•
SHANK DIAMETER: 0.148 INCHES NOMINAL IN
•
FASTENER LENGTH: 3.000 INCHES NOMINAL IN
•
HEAD STYLE: FLAT
•
POINT STYLE: DIAMOND
•
SHANK STYLE: SMOOTH ROUND
•
STERILIZED: NO
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS
DECORATIVE HEADNO
SHANK DIAMETER0.148 INCHES NOMINAL IN
FASTENER LENGTH3.000 INCHES NOMINAL IN
HEAD STYLEFLAT
POINT STYLEDIAMOND
SHANK STYLESMOOTH ROUND
STERILIZEDNO
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
FABRICATION METHODCOLD FORMED
UNPACKAGED UNIT WEIGHT5.000 POUNDS LBS
SUBSTITUTES & CROSS-REFERENCES 5
ASTM-F1667 NL CM S-09BReference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS90713-9 SZ3IN. X .148IN. DIA.Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-N-105Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-N-105 TY2ST10SZ3 L X.148IN.D.Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS90713-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy COM10530?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is COM10530?
COM10530 is a COM10530.
What parts can replace COM10530?
There are 5 known substitutes for COM10530: ASTM-F1667 NL CM S-09B, MS90713-9 SZ3IN. X .148IN. DIA., FF-N-105 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for COM10530?
COM10530 is cataloged in the U.S. Government catalog under NSN 5315-00-753-3883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — COM10530

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.