PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CNS832-0
CNS832-0 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include nut_height: 0.138 INCHES MAXIMUM IN, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, pilot_length: 0.030 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), pilot_diameter: 0.212 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-042-2790, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CNS832-0
NSN: 5310-01-042-2790
FSC: 5310
CAGE: 26233 — NYLOK LLC (USA)
SPECIFICATIONS
nut_height0.138 INCHES MAXIMUM IN
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
pilot_length0.030 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.212 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.164 INCHES IN
thread_quantity_per_inch32
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
surface_treatment_document_and_classificationQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-042-2790
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CNS832-0 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PILOT DIAMETER: 0.212 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NUT HEIGHT: 0.138 INCHES MAXIMUM IN
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
PILOT DIAMETER0.212 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NUT HEIGHT0.138 INCHES MAXIMUM IN
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
NOMINAL THREAD SIZE0.164 INCHES IN
THREAD CLASS2B
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
8320Interchangeable
interchangeable cross-reference
interchangeable
AA59214-8A-3Interchangeable
interchangeable cross-reference
interchangeable
A-A-59214Interchangeable
interchangeable cross-reference
interchangeable
857B1Interchangeable
interchangeable cross-reference
interchangeable
8320-1Interchangeable
interchangeable cross-reference
interchangeable
82N82Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CNS832-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CNS832-0?
CNS832-0 is a NUT,PLAIN,CLINCH.
What parts can replace CNS832-0?
There are 16 known substitutes for CNS832-0: 8320, AA59214-8A-3, A-A-59214 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CNS832-0?
CNS832-0 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-042-2790. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CNS832-0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026