CMR04F111J0DM — CAPACITOR,FIXED,MICA DIELECTRIC

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

CMR04F111J0DM: CAPACITOR,FIXED,MICA DIELECTRIC.

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.350 INCHES MAXIMUM IN, body_height: 0.110 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, body_length: 0.300 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, terminal_length: 1.000 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-048-9184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ CMR04F111J0DM

NSN: 5910-01-048-9184
FSC: 5910 — Capacitors
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	0.350 INCHES MAXIMUM IN
body_height	0.110 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
body_length	0.300 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
terminal_length	1.000 INCHES MINIMUM IN
terminal_diameter	0.016 INCHES NOMINAL IN
reliability_indicator	ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
specification/standard_data	81349-MIL-C-39001/5 GOVERNMENT SPECIFICATION
NSN	5910-01-048-9184

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL DIAMETER: 0.016 INCHES NOMINAL IN

•

BODY STYLE: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE

•

TOLERANCE RANGE PER SECTION: -2.00 TO 2.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.000 INCHES MINIMUM IN

•

BODY WIDTH: 0.350 INCHES MAXIMUM IN

•

BODY HEIGHT: 0.110 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

TERMINAL DIAMETER	0.016 INCHES NOMINAL IN
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TOLERANCE RANGE PER SECTION	-2.00 TO 2.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.000 INCHES MINIMUM IN
BODY WIDTH	0.350 INCHES MAXIMUM IN
BODY HEIGHT	0.110 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS	+0.0 TO 70.0 SINGLE SECTION
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.0100

SUBSTITUTES & CROSS-REFERENCES 9

CMR04F111JPDLReference document

Same NSN cross-reference

Reference document — Secondary reference

CMR04F111GODRSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MILC39001-5Reference document

Same NSN cross-reference

Reference document — Secondary reference

DM10D111G0100WV1CRReference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

CD10FD111JReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

CM04FD111J03Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy CMR04F111J0DM?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CMR04F111J0DM?

CMR04F111J0DM is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).

What parts can replace CMR04F111J0DM?

There are 9 known substitutes for CMR04F111J0DM: CMR04F111JPDL, CMR04F111GODR, MILC39001-5 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for CMR04F111J0DM?

CMR04F111J0DM is cataloged in the U.S. Government catalog under NSN 5910-01-048-9184. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CMR04F111J0DM — CAPACITOR,FIXED,MICA DIELECTRIC

Request a Quote — CMR04F111J0DM