PartsTable
Technical Data Sheet
PartsTable / MRO / CM40D912G
CM40D912G ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES, body_width: 0.312 INCHES NOMINAL IN, body_height: 0.625 INCHES NOMINAL IN, body_length: 1.016 INCHES NOMINAL IN, terminal_length: 1.375 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-184-5983, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CM40D912G
NSN: 5910-00-184-5983
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
body_width0.312 INCHES NOMINAL IN
body_height0.625 INCHES NOMINAL IN
body_length1.016 INCHES NOMINAL IN
terminal_length1.375 INCHES MINIMUM IN
terminal_diameter0.040 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-C-5/6A GOVERNMENT SPECIFICATION A
NSN5910-00-184-5983
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,MICA DIELECTRIC TITLE COMPONENT PN CM40D912G MFR CAPACITOR,FIXED,MICA D
KEY FEATURES
•
TERMINAL SURFACE TREATMENT: SOLDER
•
TEST DATA DOCUMENT: 81349-MIL-C-5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
CAPACITANCE VALUE PER SECTION: 9100.000 PICOFARADS SINGLE SECTION
•
TERMINAL LENGTH: 1.375 INCHES MINIMUM IN
•
BODY WIDTH: 0.312 INCHES NOMINAL IN
•
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS: -100.0 TO 100.0 SINGLE SECTION
•
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION: 300.0 DC SINGLE SECTION
•
SCHEMATIC DIAGRAM DESIGNATOR: NO COMMON OR GROUNDED ELECTRODE(S)
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
TERMINAL SURFACE TREATMENTSOLDER
TEST DATA DOCUMENT81349-MIL-C-5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CAPACITANCE VALUE PER SECTION9100.000 PICOFARADS SINGLE SECTION
TERMINAL LENGTH1.375 INCHES MINIMUM IN
BODY WIDTH0.312 INCHES NOMINAL IN
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION300.0 DC SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
TOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
CM40D682KInterchangeable
interchangeable cross-reference
interchangeable
MILC5-6Interchangeable
interchangeable cross-reference
interchangeable
CM40C512JInterchangeable
interchangeable cross-reference
interchangeable
CM40D512JInterchangeable
interchangeable cross-reference
interchangeable
CM40B472KInterchangeable
interchangeable cross-reference
interchangeable
MS35010-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CM40D912G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CM40D912G?
CM40D912G is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace CM40D912G?
There are 13 known substitutes for CM40D912G: CM40D682K, MILC5-6, CM40C512J and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CM40D912G?
CM40D912G is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-184-5983. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CM40D912G

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026